You may also like
1/2IN 45D LT CORD CONN .125-.250
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Wiring Devices
- Product Type:
- 45 Degree Cord Connector
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Color:
- Metallic
- Product Material:
- Malleable Iron
- Pack size (unit):
- 100
Thomas & Betts 2200 – Frequently Asked Questions
1) What cord diameter range does the Thomas & Betts 2200 cord connector accept?
The 2200 is built for cords measuring .125 to .250 inch in outside diameter. Anything larger than a quarter inch will not seat in the grip, so measure the jacket OD on your SO or SJ cord before ordering. For heavier cords you need a connector with a larger clamping range.
2) What size conduit hub does the 2200 cord connector thread into?
It has a 1/2 inch threaded hub, so it lands in a standard 1/2 inch knockout or 1/2 inch trade size fitting on a box, fixture, or enclosure.
3) Why use a 45 degree cord connector instead of a straight one?
The 2200 is a 45 degree body, which turns the cord away from the box at a half angle. That matters where a straight connector would push the cord hard against a wall, ceiling, or machine housing, and where a full 90 would kink it. If your cord drop comes straight out of the enclosure with clearance behind it, a straight connector is the simpler pick.
4) Is the Thomas & Betts 2200 connector metal or plastic?
Malleable iron, finished metallic. That makes it a better fit than a plastic grip for industrial machine drops, shop equipment, and areas where the cord entry takes mechanical abuse.
5) Can I use the 2200 cord grip on small gauge control or instrument cable?
Yes, within the .125 to .250 inch jacket range, which covers a lot of small multiconductor control cable and light cordage. It clamps on the outer jacket, not the conductors, so the cable has to have a round jacket in that OD window to grip properly.
How fast can I get the Thomas & Betts 2200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 2200 come with a warranty?
Absolutely. The Thomas & Betts 2200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 2200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 2200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.