You may also like
1/2X1/2X1/4 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.5
- Size 2:
- 0.5
- Size 3:
- 0.25
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.29 lbs
ASC Engineered Solutions 311037204 – Frequently Asked Questions
1) What size are the three openings on the ASC 1/2 x 1/2 x 1/4 galvanized malleable iron tee?
The run is 1/2 inch on both ends and the branch outlet reduces to 1/4 inch. All three openings are female pipe thread (FPT), so pipe or male-threaded nipples thread into the fitting, not over it. That makes it the fitting to use when you are running 1/2 inch line and need a smaller 1/4 inch take-off for a gauge, sensor, drain or small feed.
2) Is this galvanized tee UL listed and FM approved for fire sprinkler work?
Yes, the fitting carries UL/FM recognition, so it can be used where a listed and approved fitting is called for on a sprinkler or fire protection line. It is a standard pattern malleable iron fitting dimensioned and pressure rated to ASME B16.3.
3) Galvanized or black malleable iron tee, which do I need?
Galvanized is the one to use on water lines and anywhere the fitting sees moisture or outdoor exposure, because the hot dip zinc coating to ASTM A-153 resists rust. Black malleable iron is the usual choice for gas piping and dry sprinkler-free interior service. This ASC tee is galvanized, so it pairs with galvanized steel pipe; mixing galvanized fittings onto black pipe works mechanically but you lose the corrosion protection at the pipe itself.
4) Will this reducing tee meet a spec calling for ASME B16.3 Class 150 malleable iron fittings?
It is dimensioned and pressure rated to ASME B16.3 and made from malleable iron to ASTM A-197, in the standard (STD) pattern rather than an extra-heavy one. If the drawing calls for standard pattern B16.3 galvanized malleable iron, this fits the callout. If it calls for extra heavy, you need a different pattern.
5) What is the manufacturer part number for this ASC galvanized reducing tee?
ASC Engineered Solutions part number 311037204 covers the 1/2 x 1/2 x 1/4 galvanized malleable iron tee. Quote that number when matching an existing stock item or standardizing a parts list.
How fast can I get the ASC Engineered Solutions 311037204 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311037204 come with a warranty?
Absolutely. The ASC Engineered Solutions 311037204 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311037204?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311037204 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.