You may also like
1/2X1/2X3/8 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.5
- Size 2:
- 0.5
- Size 3:
- 0.375
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.32 lbs
ASC Engineered Solutions 311037006 – Frequently Asked Questions
1) What size are the three openings on the ASC Engineered Solutions galvanized malleable iron reducing tee?
It's a 1/2 x 1/2 x 3/8 tee: the run is 1/2 inch on both ends and the branch outlet reduces to 3/8 inch. All three openings are female pipe thread (FPT), so pipe or male-threaded nipples thread into the fitting, not over it.
2) Can I use this tee on a fire sprinkler system?
It carries UL/FM approval, so it can be specified on fire protection piping. It's a standard (STD) class fitting dimensioned and pressure rated to ASME B16.3, which is the governing standard for threaded malleable iron fittings. Confirm the pressure class matches your sprinkler system design before installing.
3) Is a galvanized malleable iron tee OK for water lines, or should I use black iron?
Galvanized malleable iron is the usual choice for domestic water and wet service where black iron would rust; black iron is used on gas and on closed loops. This fitting is malleable iron per ASTM A-197 with a hot dip galvanized coating per ASTM A-153, which is the heavier zinc coating specified for threaded iron fittings.
4) Do the dimensions of this ASC tee match other brands' malleable iron fittings?
They should. It's built to ASME B16.3, which fixes center-to-end dimensions and threading for standard class malleable iron threaded fittings, so a 1/2 x 1/2 x 3/8 tee from any conforming maker takes up the same space in the run. That matters when you're replacing a single fitting in an existing assembly without re-cutting nipples.
5) How heavy is a 1/2 x 1/2 x 3/8 galvanized malleable iron tee for ordering in bulk?
About 0.32 lbs each. Handy if you're pricing freight on a case quantity or figuring hanger loads on a long horizontal run of small fittings.
How fast can I get the ASC Engineered Solutions 311037006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311037006 come with a warranty?
Absolutely. The ASC Engineered Solutions 311037006 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311037006?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311037006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.