Metallics JRMB104 1/4-20 x 2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Metallics JRMB104 1/4-20 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

Metallics JRMB104 1/4-20 x 2 in. Round Head Slotted Machine Screws - Brass - Each

(No reviews yet) Write a Review

Model: JRMB104
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • 1/4-20 Diameter, 2" Length
    • Brass Material
    • Round head with slotted Drive

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.16 - 0.175 in.
Fastener Head Type:
Round
Fastener Head Width:
0.443 - 0.472 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
4.57 in
Product Length:
3 in
Product Weight:
2.52 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.104 - 0.130
Slot Depth:
0.082 - 0.109
Slot Width:
0.064 - 0.075
Sub Division:
Electrical-E H2
Thread Per Inch:
20
Thread Standard:
ANSI/ASME B1.1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRMB
Product Details:
Machine Screw
Product Material:
Brass

Metallics JRMB104 – Frequently Asked Questions

1) Will a 1/4-20 machine screw thread into a standard 1/4-20 tapped hole or nut?
Yes. The Metallics JRMB104 is cut to 1/4-20 UNC at 20 threads per inch, to the ANSI/ASME B1.1 thread standard, so it mates with any 1/4-20 tapped hole, coupling nut, or 1/4-20 nut. Overall length under the head is 2 inches, so subtract your material thickness to see how much thread is left for the nut.
2) Can these be used on a Buy American or ARRA funded job?
No. The JRMB104 brass machine screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. For a federally funded project with domestic sourcing requirements, you need a domestically manufactured fastener instead.
3) Is brass the right screw material for an outdoor or damp electrical enclosure?
Brass holds up in damp and corrosive locations better than plain steel, and it is non-magnetic, which is why these are listed for electrical, plumbing, and HVAC work. The tradeoff is strength: brass is softer than steel or stainless, so do not torque it like a steel screw and do not use it where a structural load is carried.
4) Do these brass machine screws meet a recognized dimensional spec for submittals?
Yes. The JRMB104 is made to ASME B18.6.3, the dimensional standard for inch-series slotted and recessed head machine screws, with threads to ANSI/ASME B1.1. Those are the two references a spec reviewer looks for on a machine screw submittal.
5) How are these sold, loose or in a package, and is there a minimum?
They ship in a jar of 100, which is also the order minimum. Shipping weight on the jar is 2.52 lbs. Other sizes and quantities can be had by request.
6) Can I rely on a tensile strength rating for these screws?
No published tensile figure applies here. Metallics notes that tensile values given for its stainless machine screws are approximations only, since there is no single performance standard for stainless machine screws, and brass is a softer material than either stainless or steel. Treat the JRMB104 as a general fastening and grounding-hardware screw, not a load-rated one.
7) Do these brass machine screws come with nuts or washers?
No. The JRMB104 is the screw only, 100 per jar. If your hole is not tapped you will need matching 1/4-20 nuts, and any flat or lock washers, ordered separately.
How fast can I get the Metallics JRMB104 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMB104 come with a warranty?
Absolutely. The Metallics JRMB104 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMB104?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMB104 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!