Metallics JTRM104 1/4-20 x 2 i...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JTRM104 1/4-20 x 2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

Metallics JTRM104 1/4-20 x 2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTRM104
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
1/4-20 x 2 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

  • Features

    • Steel Zinc Material
    • 1/4 -20 Diameter, 2" Length
    • Round head with slotted, Phillips and square Drive
    • Made in the USA

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Round
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTRM104 – Frequently Asked Questions

1) What drivers will work on the Metallics JTRM104 tri-drive machine screw?
The JTRM104 has a tri-drive round head, so it takes a flat blade, a Phillips bit, or a square (Robertson) driver. On a panel or box install that means whatever is already on your belt will turn it, and you can swap to a square bit when you need more bite overhead.
2) Will a 1/4-20 machine screw thread into a standard electrical box or panel ground lug?
The JTRM104 is a 1/4-20 UNC thread, 2 inches long. It mates with any 1/4-20 tapped hole or 1/4-20 nut. Note that most steel outlet box and device mounting holes are 8-32 or 10-32, not 1/4-20, so check the tapped size before you order these for box work; 1/4-20 is more common in strut, panel enclosures, and heavier mounting brackets.
3) Is a 2 inch long screw too long for my application?
Machine screws thread the full way, so at 2 inches of length the JTRM104 suits stacked assemblies, thicker brackets, or anywhere you need to pass through several layers and pick up a nut on the far side. For a thin single plate it will stand well proud, since a machine screw does not pull in like a tapping screw.
4) Are these zinc plated screws OK for outdoor or damp locations?
These are steel with zinc plating. Zinc handles indoor and dry locations fine, including panel and enclosure interiors. For wet, coastal, or corrosive exposure, specify stainless steel instead; zinc plating on steel will eventually bloom and rust in standing moisture.
5) Does a round head screw sit flush, or do I need a flat head?
Round head, so it sits on top of the surface with a domed profile, not flush. If your bracket or cover is countersunk and the fastener has to finish level, this is the wrong head style and you want a flat head machine screw instead.
6) Do these Metallics machine screws come with nuts?
No. The JTRM104 ships as screws only, 100 to the jar. If the hole you are fastening into is not already tapped 1/4-20, order 1/4-20 hex nuts and any washers separately.
7) How do Metallics JTRM104 screws come packaged?
They come in a jar, 100 pieces. That is a shop or truck-stock quantity rather than a loose handful, so it suits an MRO cage or a service van where you want 1/4-20 x 2 on hand without reordering per job.
How fast can I get the Metallics JTRM104 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTRM104 come with a warranty?
Absolutely. The Metallics JTRM104 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTRM104?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTRM104 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!