Metallics HW14W 1/4 x 100' Wire Hrnss Wrap Wh

The HW14W is a 1/4 inch wire harness wrap supplied on a 100 foot roll, in white. The 1/4 inch size refers to the bundle diameter it is sized around, so it suits small bundles of low voltage, control, or thermostat conductors rather than heavy feeder runs.

White. If the run is exposed on a white ceiling, white wall, or inside a white enclosure and you want the bundle to disappear, the HW14W is the one to order. For bundles that need to blend into dark equipment or conduit runs, look for the black version of the same 1/4 inch wrap instead.

Yes, and for a lot of MRO and panel work it is the better choice. A spiral style harness wrap bundles the conductors continuously over the whole length rather than cinching at points, so there are no pinch marks on the jacket and you can break a single conductor out anywhere along the run without cutting anything off. The HW14W gives you 100 feet of 1/4 inch wrap on one roll, so a single roll covers a lot of panel and device drops. Zip ties still make more sense where you need a hard anchor to a strut or a chassis stud.

Order it as Metallics HW14W. That number covers the 1/4 inch by 100 foot white harness wrap as a single roll, which is the item to quote if you are matching a submittal or restocking an MRO cart.