You may also like
15KV PCJ SPLICE NO SELING KIT
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Idea Granular Category Code Igcc :
- 4677 >> Cable joint
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Connectors
- Product Type:
- Power Cable Joint
- Selling Unit Of Measure:
- each
- Standards:
- IEEE Standard 404
- Voltage Rating:
- 15 kV
- Department:
- Electrical
- Product Subgroup:
- Splice Connectors
- Product Color:
- Black
- Product Material:
- EPDM Rubber
Thomas & Betts 15PCJ2G1270 – Frequently Asked Questions
1) What voltage class is the Thomas & Betts 15PCJ2G1270 cable splice rated for?
The 15PCJ2G1270 is a 15 kV class power cable joint, so it is intended for medium voltage distribution cable, not secondary or 600 V work. If your circuit is 5 kV or 25 kV class, this is the wrong kit.
2) Is the 15PCJ2G1270 splice a compression connection or a shear-bolt type?
It uses a compression connection, so you will need the matching die set and a hydraulic or battery crimp tool on site to make up the conductor connector. Shear-bolt connectors are the alternative if you want a tool-free, multi-range conductor joint.
3) Does this Thomas & Betts splice meet a recognized cable joint standard for utility or institutional specs?
It is built to IEEE Standard 404, the standard covering cable joints for medium voltage power cable. That is the reference most utility and institutional specs call out for a 15 kV joint.
4) Does the 15PCJ2G1270 come as a complete kit with sealing materials?
No. The 15PCJ2G1270 is the PCJ splice supplied without a sealing kit, so any sealing or re-jacketing materials your installation detail calls for have to be ordered separately.
5) How many conductors does the Thomas & Betts 15PCJ2G1270 splice kit cover?
The kit is built for a 2 conductor splice. For a three-phase run you would order per the number of cables being jointed rather than assuming one kit covers all phases.
6) What is the splice body made of, and does it hold up in a direct-buried or wet vault?
The body is molded EPDM rubber in black. EPDM is the standard elastomer for medium voltage molded joints because it stays flexible and resists ozone and moisture, which is why these bodies are used in manholes, vaults and direct-buried runs.
7) What part number do I give my distributor for the 15 kV PCJ splice?
Order it as Thomas & Betts 15PCJ2G1270. That is the manufacturer part number for the 15 kV PCJ splice supplied without the sealing kit.
8) Is the 15PCJ2G1270 sold individually or in a carton?
It is sold each, one splice per unit, so order one per joint you intend to make up.
How fast can I get the Thomas & Betts 15PCJ2G1270 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 15PCJ2G1270 come with a warranty?
Absolutely. The Thomas & Betts 15PCJ2G1270 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 15PCJ2G1270?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 15PCJ2G1270 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.