You may also like
1X1X3/8 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 1
- Size 2:
- 1
- Size 3:
- 0.375
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.63 lbs
ASC Engineered Solutions 311040208 – Frequently Asked Questions
1) What are the three outlet sizes on the ASC Engineered Solutions 1 x 1 x 3/8 galvanized malleable iron tee?
Two runs at 1 inch and a reducing branch at 3/8 inch. All three openings are female pipe thread (FPT), so it drops into a 1 inch threaded run and gives you a 3/8 inch tap off the side for a gauge, drain, sensor, or small branch line.
2) Is this galvanized tee approved for fire sprinkler piping?
It carries UL/FM approval, so it can be used on fire protection piping where UL Listed and FM Approved fittings are required. The 3/8 inch branch is a common size for a gauge or drain connection on a sprinkler riser.
3) Is a galvanized malleable iron tee the right choice, or should I use black iron?
Go galvanized where moisture or corrosion is a factor, wet sprinkler systems, outdoor or damp mechanical rooms, and domestic water where local code still permits galvanized steel. This tee is malleable iron with a hot dip galvanized coating to ASTM A-153. Black malleable iron is the usual pick for dry gas and dry-pipe work where the zinc coating buys you nothing. Both use the same NPT threads, so they interchange dimensionally.
4) Is this a Class 150 standard tee or an extra heavy fitting?
Standard pattern. The fitting is rated STD and built to ASME B16.3, which is the malleable iron threaded fittings standard covering Class 150 and Class 300 pressure classes. If your drawing calls out extra heavy (Class 300), a standard fitting is not a substitute.
5) Will this tee match the lay length of the fitting I am replacing?
It is dimensioned to ASME B16.3, the same standard other domestic malleable iron threaded fittings are built to, so center-to-end dimensions match any other B16.3 1 x 1 x 3/8 tee. You can pull an existing one out and thread this in without re-measuring the run.
6) What does ASTM A-197 mean for the iron in this fitting?
A-197 is the cupola malleable iron casting spec, the grade used for threaded pipe fittings. It is more ductile than gray cast iron, which is why malleable fittings tolerate the wrench torque and vibration that threaded pipe work puts on them.
7) What is the ASC Engineered Solutions part number for the 1 x 1 x 3/8 galvanized tee?
Order it as part number 311040208, an ASC Engineered Solutions galvanized malleable iron reducing tee.
8) How much does one of these tees weigh for a bulk order?
0.63 lbs each. Handy for working out freight when you are buying a case lot for a job.
How fast can I get the ASC Engineered Solutions 311040208 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311040208 come with a warranty?
Absolutely. The ASC Engineered Solutions 311040208 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311040208?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311040208 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.