You may also like
2-1/2" Hole Cutter 1-3/8" Deep
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics TCT212DT – Frequently Asked Questions
1) What size hole does the Metallics TCT212DT hole cutter make, and how deep will it cut?
The TCT212DT cuts a 2-1/2 inch diameter hole with a 1-3/8 inch cutting depth. That depth is what decides whether it clears your material in one pass, so for stock thicker than 1-3/8 inches you need to cut from both sides or step up to a deeper cutter.
2) What is the Metallics part number for a 2-1/2 inch hole cutter?
Order it as Metallics TCT212DT. That is the manufacturer part number for the 2-1/2 inch, 1-3/8 inch deep hole cutter, and it is the only model on the item.
3) Will a 2-1/2 inch hole cutter work for cutting a hole in an enclosure or panel for a conduit fitting?
That is the normal use. Sheet steel enclosures, panel sides, and junction box walls are all well under the 1-3/8 inch cutting depth of the TCT212DT, so a single pass clears the material and leaves a clean 2-1/2 inch opening for a 2 inch connector or hub.
4) Do I need a separate pilot bit and arbor to use the Metallics TCT212DT?
A 2-1/2 inch hole cutter mounts on an arbor with a pilot drill, and those are supplied separately from the cutter itself. If you do not already have an arbor sized for a 2-1/2 inch cup, add one to the order along with a pilot bit so the cutter is ready to run.
How fast can I get the Metallics TCT212DT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TCT212DT come with a warranty?
Absolutely. The Metallics TCT212DT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TCT212DT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TCT212DT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.