You may also like
2-13/16 to 3-3/4 Hose Clamp St
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Electrical Hardware
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Conduit Clamps
Metallics MHC52 – Frequently Asked Questions
1) What diameter range does the Metallics MHC52 hose clamp adjust to?
The MHC52 clamps anything from 2-13/16 inches up to 3-3/4 inches in outside diameter. That band covers a reasonable spread, so one clamp handles several nominal sizes of hose, duct sleeve, or conduit sleeve within that OD window. Measure the actual outside diameter of what you are banding, not the nominal pipe size, and confirm it falls inside the range before ordering.
2) Is the MHC52 hose clamp a worm drive band clamp or a two bolt clamp?
The MHC52 is a worm drive band style hose clamp, which is what the adjustable 2-13/16 to 3-3/4 inch range tells you. You tighten it with a slotted driver or a 5/16 hex driver on the screw housing, and it draws the band down evenly around the full circumference. If you need a rigid two hole strap that holds conduit at a fixed standoff from a wall, that is a conduit strap, not this clamp.
3) Do I need anything else to install a Metallics MHC52 hose clamp?
Nothing beyond a driver. The MHC52 is a self contained band clamp, so there is no separate nut, bolt, or backing plate to buy. If you are using it to support conduit off a structure rather than to seal a hose or sleeve, you will still need your own strut, hanger, or standoff hardware, since a band clamp only closes around the pipe, it does not anchor it.
4) Can I use the Metallics MHC52 clamp to band a flexible duct or sleeve over conduit?
That is exactly the application a band clamp of this size suits. With a 2-13/16 to 3-3/4 inch range, the MHC52 will close a flex sleeve, boot, or duct collar onto a pipe or fitting whose combined outside diameter falls in that band. Measure over the sleeve, not under it, since the material thickness adds to the OD you are clamping.
5) How many sizes or options does the Metallics MHC52 come in?
MHC52 is a single part number with one adjustment range, 2-13/16 to 3-3/4 inches. There is no finish or length choice to specify. For diameters above or below that window, you move to a different model in the Metallics MHC hose clamp series rather than changing an option on this one.
How fast can I get the Metallics MHC52 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MHC52 come with a warranty?
Absolutely. The Metallics MHC52 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MHC52?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics MHC52 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.