You may also like
2 IN 90 DEG RIGID ELBOW 304SS
Manufacturer Resources
Product Specs
- Number Of Batteries:
- 0
- Product Group:
- Conduit & Fittings
- Product Type:
- Rigid and Intermediate Metal Conduit Fittings
- Department:
- Electrical
- Product Subgroup:
- Conduit Elbows
- Product Material:
- 304 Stainless Steel
Thomas & Betts ELL2SS – Frequently Asked Questions
1) What size and bend is the Thomas & Betts ELL2SS conduit elbow?
The ELL2SS is a 2 inch, 90 degree rigid conduit elbow. It turns a 2 inch rigid metal conduit run through a right angle, so it mates with 2 inch trade size RMC on both ends.
2) Is the ELL2SS elbow stainless steel, and where does that matter on a job?
It is made from 304 stainless steel. That is the grade specified for wash-down areas, food and beverage plants, coastal and marine-air exposure, water treatment, and exterior runs where a galvanized rigid elbow would eventually rust at the threads. On a dry interior run indoors, standard galvanized rigid is the usual spec and this is the upgrade you buy when corrosion is the concern.
3) Will a 2 inch stainless rigid elbow thread into my existing galvanized rigid conduit?
Yes. The ELL2SS is a rigid metal conduit fitting in 2 inch trade size with standard tapered rigid conduit threads, so it threads to 2 inch galvanized RMC, IMC couplings, and threaded hubs the same way a galvanized elbow would. Mixing stainless with galvanized is common at the corrosive end of a run, though some specs call for the whole run to be stainless to avoid dissimilar metal contact.
4) Should I use a factory 90 degree elbow or bend the conduit myself?
For 2 inch rigid, a factory elbow is the practical choice. Bending 2 inch RMC needs a hydraulic bender and still leaves you re-threading the cut end. The ELL2SS gives you a finished 90 with threads on both ends ready to couple in. Field bending only makes sense when you need an offset or a non-standard radius that no stock elbow covers.
5) Does the ELL2SS elbow come with couplings or locknuts?
No. The ELL2SS is the elbow only, a single 2 inch 90 degree stainless fitting. Couplings to join it to the adjoining conduit, plus any locknuts, bushings, or sealing fittings your termination calls for, are ordered separately, and in a corrosive location you would normally match those in stainless as well.
6) Is there more than one version of the Thomas & Betts ELL2SS to choose from?
No options to specify. ELL2SS is a single catalog number covering the 2 inch, 90 degree, 304 stainless rigid elbow. If you need a different trade size or a different bend angle, that is a different part number in the ELL series.
How fast can I get the Thomas & Betts ELL2SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts ELL2SS come with a warranty?
Absolutely. The Thomas & Betts ELL2SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts ELL2SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts ELL2SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.