#2 Phillips 6" Cushion Grip Demolition Screwdriver (USA)
Features
- Made in USA with USA sourced materials
- Visible ID Markings
- Hammer Ready Strike Cap (select models)
- Precise Fit – Reduces Stripping
- Available Shank Lengths: 3-inch to 10-inch
- Anti-Slip Tip – Laser Etched
- Comfortable, Cushion Grip Handle
- Available Tip Types: Cabinet, ECX, Phillips, Slotted, and Square
- Wrench Ready Bolster (select models)
- Lifetime Guarantee
- Long Lasting – High Strength Boron-Infused Steel
- Precision Control Knurled Shank (select models)
Manufacturer Resources
Product Specs
- Product Type:
- Hardware
- Department:
- Electrical
- Product Subgroup:
- Screwdrivers & Drivers
- Handle Type:
- Cushion Grip
- Handle Material:
- Acetate
- Product Finish:
- Chrome
- Country of Origin:
- United States
- Product Length:
- 10.8 in
- Product Group:
- Hand Tools
Milwaukee MT205 – Frequently Asked Questions
1) What size Phillips tip is on the Milwaukee MT205 and what screws does it drive?
It's a #2 Phillips, which is the size that fits the great majority of general construction and electrical fasteners: device screws on receptacles and switches, cover plate screws, drywall screws, and standard #6 through #10 wood screws. The tip is laser etched and anti-slip, and Milwaukee calls out a precise fit to reduce stripping, which matters when you're backing out painted-over device screws in an old panel or box.
2) Is the 6 inch shank on the MT205 long enough to reach device screws in a deep box?
The MT205 carries a 6 inch shank, which is the workhorse length for electrical work: long enough to reach terminal and device screws set back in a deep 4-square or gang box without the handle fouling the box edge, but still short enough to control in a panel. Milwaukee builds this line in shank lengths from 3 inches to 10 inches, so go shorter for cabinet and tight-cavity work and longer when you need to reach past insulation or through a deep enclosure.
3) I need a driver for combination head electrical screws, not straight Phillips. Is the MT205 the right one?
No. The MT205 is a dedicated #2 Phillips. For combination head fasteners common on devices and panel covers, look to the ECX tip in the same Milwaukee demolition line, which is built for combination Phillips/slotted heads. Same boron-infused steel shank and cushion grip, different tip geometry.
4) Can you hit the end of the Milwaukee MT205 screwdriver with a hammer?
The MT205 is part of Milwaukee's demolition screwdriver line, which includes a hammer ready strike cap on select models. If you need a driver you can strike to break a seized fastener loose or scrape and pry, that strike cap is the feature to look for on the demolition series. The MT205 also has the boron-infused steel shank common to the line, which is what lets these tools take abuse a standard driver won't.
5) Can I put a wrench on this screwdriver for extra torque?
Milwaukee includes a wrench ready bolster on select drivers in this demolition line, which gives you a flat to put an open-end wrench on when a fastener is seized. That's the feature to confirm if added torque is the reason you're buying. The boron-infused steel shank is what makes torquing on the bolster practical rather than a way to twist the tool.
6) Is the Milwaukee MT205 made in the USA?
Yes. The MT205 demolition screwdriver is made in the USA with USA sourced materials, which is the point for buyers working under domestic-content purchasing rules on government, institutional, or public works jobs.
7) What is the exact part number to order this Milwaukee #2 Phillips demolition screwdriver?
Order Milwaukee part number MT205. That is the #2 Phillips, 6 inch cushion grip demolition screwdriver. If you're building out a set, Milwaukee offers the same line in cabinet, ECX, Phillips, slotted, and square tips, so the tip type and shank length are the two things to specify beyond the model.
8) Will the MT205 handle be comfortable for a full day of driving screws, and can I tell it apart in a pouch?
The handle is a cushion grip, meant for repeated driving rather than occasional use, and the driver carries visible ID markings so you can pick the right tip and size out of a pouch or bucket without holding each one up to the light. On a crew standardizing tool kits across trucks, those ID markings are what keep the #2 Phillips from coming back as a #1.
How fast can I get the Milwaukee MT205 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee MT205 come with a warranty?
Absolutely. The Milwaukee MT205 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee MT205?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee MT205 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.