You may also like
25320 Viega MegaPress tee Smart Connect technology Carbon steel, 1-1/2'' x 1-1/2'' x 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P1 x P2 x P3
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2'' x 1-1/2'' x 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 6.87"
- Product Height:
- 2.437"
- Product Weight:
- 2.16 lbs
- Product Width:
- 4.634"
- Product Material:
- Carbon steel
Viega 25320 – Frequently Asked Questions
1) Will the Viega MegaPress 25320 tee work on 1-1/2 inch black iron or carbon steel pipe?
Yes. The 25320 is a carbon steel MegaPress tee with press ends on all three outlets, sized 1-1/2 inch by 1-1/2 inch by 1-1/2 inch, so it presses onto 1-1/2 inch Schedule 10 through Schedule 40 black iron or carbon steel pipe. It is a press fitting, not threaded, so the pipe ends get cut and deburred rather than cut and threaded.
2) How much room do I need to fit a 1-1/2 inch MegaPress tee between other fittings?
Plan the layout around 6.87 inches of length, 4.634 inches of width and 2.437 inches of height for the fitting body. On top of that, the press jaw needs clearance to come around the fitting square to the pipe, so leave working space at each of the three press ends when you are tight to a wall, joist or an adjacent fitting.
3) Do I need a special press tool and jaws for the 25320?
Yes. MegaPress carbon steel fittings press with a press tool and MegaPress jaws or rings sized for 1-1/2 inch. Standard copper press jaws are not the right tooling for carbon steel MegaPress, and the fitting ships as a fitting only, with no tooling and no sealing element sold separately.
4) What does Smart Connect technology actually do on this tee?
Smart Connect is Viega's feature that makes an unpressed connection show itself. The sealing element is shaped so an unpressed joint leaks under test pressure instead of holding, which is how a crew finds a missed press during pressure testing rather than after the ceiling closes up. It does not change how the fitting is pressed, and every joint still has to be pressed.
5) Should I use a MegaPress tee or a threaded or welded tee on 1-1/2 inch steel pipe?
A press tee like the 25320 is the choice when you want no flame and no threading on the job: cut, deburr, mark depth, press. Threaded tees still make sense when you are tying into existing threaded nipples or unions, and welding is typically where high-pressure or high-temperature service or local spec calls for it. On retrofit work in occupied buildings, the no-hot-work part of pressing is usually the deciding factor.
6) Is this the Viega part number 25320, and where is it made?
The manufacturer part number is 25320, a Viega MegaPress carbon steel tee, and it is made in Germany. Each one weighs 2.16 lbs, which is worth knowing if you are costing a freight pallet of a few hundred fittings.
How fast can I get the Viega 25320 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25320 come with a warranty?
Absolutely. The Viega 25320 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25320?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25320 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.