You may also like
25751 Viega MegaPressG cap Smart Connect technology Carbon steel, 1-1/2''
Manufacturer Resources
Product Specs
- Connection Type:
- P
- Material Type:
- Carbon Steel
- Product Dimension:
- 1-1/2''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 3.02"
- Product Height:
- 2.437"
- Product Weight:
- 0.804 lbs
- Product Width:
- 2.437"
- Product Material:
- Carbon steel
Viega 25751 – Frequently Asked Questions
1) What size pipe does the Viega 25751 MegaPressG cap fit?
The Viega MegaPressG cap, model 25751, is a 1-1/2 inch fitting. It presses onto 1-1/2 inch carbon steel pipe to close off a run or a stub-out.
2) Is the MegaPressG 25751 cap threaded or press-fit?
It is a press connection, not threaded. The 1-1/2 inch cap slides over the pipe end and is secured with a press tool, so no threading, welding, or cutting oil is needed on the joint.
3) Can I use a MegaPressG carbon steel cap on copper or stainless tube?
No. This is a carbon steel press fitting sized for 1-1/2 inch steel pipe. Copper needs a copper press system such as Viega ProPress, and stainless needs the stainless ProPress fittings. Mixing a carbon steel body onto copper tube is both a dimensional and a dissimilar-metal problem.
4) How much room do I need around a 1-1/2 inch MegaPressG cap in a tight chase?
The cap measures 3.02 inches long with a 2.437 inch height and 2.437 inch width, so plan the overall envelope around that. Also leave clearance for the press tool jaw to come around the fitting square to the pipe, which is usually the limiting factor in a chase, not the fitting itself.
5) What does Smart Connect mean on this Viega cap?
Smart Connect is the feature Viega builds into the sealing element so an unpressed joint leaks deliberately during pressure testing. On a gas or air test that means an unpressed 25751 cap shows itself before the wall closes up, instead of after.
6) Should I cap a gas stub with a press cap or a threaded plug?
A press cap is the faster call when the stub is already plain-end steel pipe, since you cut, deburr, mark depth and press. A threaded plug only makes sense if the pipe end is already threaded or carries a threaded fitting. For a cut end in an existing MegaPressG run, the 1-1/2 inch 25751 cap avoids threading the pipe in place.
7) Is the Viega 25751 cap made in the USA?
It is made in Germany. For spec submittals that call out country of origin, list Germany for this MegaPressG fitting.
8) What is the shipping weight of a single 1-1/2 inch MegaPressG cap?
Each cap weighs 0.804 lbs, which matters mainly when you are pricing out a bulk order of caps for a multi-building MRO stock.
How fast can I get the Viega 25751 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25751 come with a warranty?
Absolutely. The Viega 25751 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25751?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25751 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.