You may also like
25765 Viega MegaPress flange Smart Connect technology Carbon steel, 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Flanges
- Product Type:
- Tee
- Product Length:
- 4.37"
- Product Height:
- 2.689"
- Product Weight:
- 1.265 lbs
- Product Width:
- 4.37"
- Product Material:
- Carbon steel
Viega 25765 – Frequently Asked Questions
1) Is the Viega 25765 MegaPress fitting made for carbon steel pipe, or can I use it on copper?
Carbon steel. The 25765 is a MegaPress fitting with a carbon steel body, and MegaPress is the press system Viega builds for black iron and carbon steel pipe. Copper and stainless lines take a different Viega press system, so don't cross them over on the same run.
2) Do I need to thread or weld to install the Viega 25765, or is it a press connection?
It presses. The 25765 is a MegaPress fitting, so you cut the pipe, mark the insertion depth, slide the fitting on and press it with a press tool and the matching jaw. No threading, no torch, no hot work permit, which is the reason most contractors reach for MegaPress on occupied buildings.
3) What does Smart Connect do on a Viega MegaPress fitting?
Smart Connect is the feature that makes an unpressed connection leak on purpose during pressure test. The 25765 carries it, so a joint you missed shows itself at test instead of after the ceiling is closed. It is a find-it feature, not a substitute for pressing every joint.
4) How much room do I need to fit a Viega 25765 in a tight ceiling or wall cavity?
The body measures 4.37 x 4.37 x 2.689 inches, and it weighs 1.265 lbs. Plan the cavity around the fitting plus the swing of the press jaw, since the tool needs clearance all the way around the pipe to close on the fitting.
5) Is a carbon steel press fitting like the Viega 25765 the right choice, or should I be threading the pipe?
Press is the faster call on carbon steel when you are working in an occupied space, over finished floors, or anywhere hot work is restricted, and the 25765 is a 3/4 inch carbon steel MegaPress fitting built for exactly that. Threading still wins if you have no press tool and jaws on the truck, since the tool is the whole cost of entry. Once you own the tool, press joints go in a fraction of the time per connection.
6) What part number do I order for the 3/4 inch Viega MegaPress carbon steel fitting, and where is it made?
Order Viega 25765. That is the manufacturer part number, it covers the 3/4 inch carbon steel MegaPress fitting, and it is made in Germany. Spec writers who list country of origin on a submittal can put German manufacture on the sheet.
How fast can I get the Viega 25765 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 25765 come with a warranty?
Absolutely. The Viega 25765 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 25765?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 25765 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.