You may also like
26106 Viega MegaPressG 45° street elbow Smart Connect technology Carbon steel, 3/4'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FTG
- Material Type:
- Carbon Steel
- Product Dimension:
- 3/4'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Street Elbows
- Product Type:
- Elbow
- Product Length:
- 3.701"
- Product Height:
- 1.496"
- Product Weight:
- 0.428 lbs
- Product Width:
- 2.583"
- Product Material:
- Carbon steel
Viega 26106 – Frequently Asked Questions
1) What does the P x FTG connection on the Viega 26106 MegaPressG 45 degree elbow mean for how it installs?
P x FTG makes this a street elbow: one end is a press socket that accepts 3/4 inch pipe, and the other end is fitting-size (FTG), so it slips directly into the press socket of another 3/4 inch MegaPressG fitting. That lets you make a 45 degree offset without a short nipple between two fittings. Both sides are 3/4 inch.
2) Is the Viega 26106 elbow for gas lines or water lines?
MegaPressG is Viega's gas-rated press line, and the 26106 is a carbon steel MegaPressG fitting, so it is intended for black iron gas piping rather than potable water. Carbon steel is not used on potable water systems.
3) What pipe does the Viega 26106 MegaPressG elbow press onto?
It presses onto 3/4 inch carbon steel (black iron) pipe. The fitting body itself is carbon steel, so it matches the pipe material; it is not for copper or stainless tube.
4) What is Smart Connect on the Viega 26106 and why does it matter on a gas job?
Smart Connect is the feature built into the fitting that lets an unpressed connection be identified during pressure testing, so a missed press shows up before the system goes into service. On a fuel gas line that is the difference between finding the error at test and finding it later.
5) Do I need anything besides the Viega 26106 fitting to make the joint?
The press socket arrives with its sealing element in place, so no dope, tape, or cutting oil is involved. What you supply is the press tool with the correct 3/4 inch MegaPress jaw, plus a square cut and deburred 3/4 inch carbon steel pipe end. The FTG end needs no press on its own, it gets pressed by the mating fitting's socket.
6) How much room do I need for the Viega 3/4 inch MegaPressG 45 degree street elbow?
The fitting measures 3.701 x 2.583 x 1.496 inches and weighs 0.428 lbs. Lay that out against your offset before committing, and remember a press tool jaw needs clearance around the socket end as well as the fitting itself.
How fast can I get the Viega 26106 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 26106 come with a warranty?
Absolutely. The Viega 26106 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 26106?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 26106 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.