You may also like
26915 Viega MegaPress Press-In Branch Connector Carbon steel, 6'' x 3/4''
Manufacturer Resources
Product Specs
- Connection Type:
- P x FPT
- Material Type:
- Carbon Steel
- Product Dimension:
- 6'' x 3/4''
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Length:
- 1.693"
- Product Height:
- 1.654"
- Product Weight:
- 0.386 lbs
- Product Width:
- 1.693"
- Product Material:
- Carbon steel
Viega 26915 – Frequently Asked Questions
1) What does the Viega MegaPress 26915 branch connector actually connect to?
The MegaPress 26915 is a press-in branch connector sized 6 inch by 3/4 inch, with a P x FPT configuration. The press side seats onto the 6 inch carbon steel main, and the outlet is a 3/4 inch female pipe thread, so your branch run starts with a male-threaded nipple or adapter rather than another press connection.
2) Can I use the Viega 26915 to add a 3/4 inch branch to black iron pipe without cutting the main apart?
That is what the part is for. It is a press-in branch connector, so it lands on the existing 6 inch carbon steel main and gives you a 3/4 inch FPT takeoff, rather than requiring you to cut in a full tee and re-thread or re-weld the line. The outlet thread means the branch is made up with threaded pipe from that point.
3) Is the Viega 26915 branch connector copper or steel, and will it work on a steel pipe system?
Carbon steel body, which matches a carbon steel or black iron main. Do not use it as a takeoff on copper tube systems; copper lines call for a copper press fitting instead.
4) How much space does the Viega MegaPress 26915 take up once it is pressed on the pipe?
The fitting itself measures 1.693 inches long, 1.693 inches wide and 1.654 inches high, and weighs 0.386 lbs. Add clearance around that footprint for the press jaw to close on the connector, which is usually the limiting factor in tight ceiling or chase work rather than the fitting body.
5) What is the Viega part number and origin for the 6 inch by 3/4 inch MegaPress branch connector?
Order it as Viega model 26915. It is made in Germany. That is the single model covering the 6 inch by 3/4 inch carbon steel press-in branch connector.
How fast can I get the Viega 26915 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Viega 26915 come with a warranty?
Absolutely. The Viega 26915 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Viega 26915?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Viega 26915 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.