You may also like
2X1X2 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 2
- Size 2:
- 1
- Size 3:
- 2
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 2.14 lbs
ASC Engineered Solutions 310051206 – Frequently Asked Questions
1) What do the 2 x 1 x 2 sizes mean on this ASC black malleable iron tee?
It's a reducing tee: both run ends are 2 inch and the branch (outlet) is 1 inch. All three openings are female pipe thread. So you run 2 inch line straight through and tap off a 1 inch branch, without needing a separate bushing in the outlet.
2) Will this ASC tee thread onto standard black steel pipe nipples?
Yes. The threads are cut to ASME B1.20.1, which is standard NPT taper thread, so it mates with any NPT-threaded black or galvanized steel pipe and nipples of the matching size. All three ends are female, so you thread male pipe ends into the fitting.
3) Is a black malleable iron tee OK for a wet sprinkler system?
This one is UL/FM rated, so it's acceptable for fire protection piping where a listed fitting is required. It's standard (STD) class malleable iron to ASME B16.3, black finish, which is the normal choice for wet sprinkler mains and branch lines. For a dry system you'd typically go galvanized instead.
4) Can I use this tee on a potable water line?
No. It's black malleable iron, which is used for gas, fire protection, compressed air, and hydronic heating lines, not domestic water. Black iron rusts in potable service. Use copper, PEX, CPVC, or brass for drinking water.
5) Does this ASC fitting meet ASME B16.3 for a mechanical spec?
It does. Dimensions and pressure rating are both to ASME B16.3, the malleable iron threaded fittings standard, with the iron itself to ASTM A-197 and threads to ASME B1.20.1. That's the three-part callout most mechanical specs ask for on a black iron fitting.
6) Is this the 150 class or 300 class tee?
Strength class is STD, which is the standard-pattern (Class 150) malleable iron fitting under ASME B16.3. If your drawing calls for extra heavy or Class 300, this is not the right fitting.
7) What is the part number and weight on the ASC 2 x 1 x 2 black tee?
Manufacturer part number is 310051206, from ASC Engineered Solutions. Each fitting weighs 2.14 lbs, worth knowing if you're figuring hanger spacing or freight on a pallet quantity.
How fast can I get the ASC Engineered Solutions 310051206 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310051206 come with a warranty?
Absolutely. The ASC Engineered Solutions 310051206 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310051206?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310051206 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.