You may also like
3 HOLE.5 INCH RECT BOX SILVER
Manufacturer Resources
Product Specs
- Application:
- Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations
- Product Group:
- Electrical Boxes
- Product Type:
- Device Boxes, Covers & Accessories
- Product type2:
- Weatherproof boxes
- Selling Unit Of Measure:
- each
- Special Functions:
- Clean cover edges help provide good gasket sealing
- Volume:
- 18.3 cu.. in
- Department:
- Electrical
- Product Subgroup:
- Outlet Boxes
- Product Color:
- Silver
- Product Material:
- Aluminum alloy
Red Dot S100E – Frequently Asked Questions
1) Can the Red Dot S100E box be used outdoors or in a wet location?
Yes. The S100E is a Red Dot Dry-Tite weatherproof box, built to protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations. The machined cover edges are kept clean so the gasket seats properly, which is what keeps water out once a cover is bolted on.
2) How many cubic inches is the Red Dot S100E rectangular box, and will it hold a device plus conductors?
The S100E has 18.3 cubic inches of volume. Use that number against the NEC box fill calculation for your conductor size, counting the device as two conductor volumes, to confirm your wire count fits before you make up the splice.
3) Does the Red Dot S100E come with a cover and gasket, or do I order those separately?
The S100E is sold as the box only, priced and shipped each. Plan on adding the Red Dot cover and gasket that suits the device you are installing, whether that is a blank, a GFCI/duplex cover or a switch cover. The box edges are machined clean specifically so a gasketed cover seals against them.
4) Is the Red Dot S100E box metal or plastic?
Aluminum alloy, finished in silver. Aluminum handles exterior exposure without rusting the way a steel box will, and it stays light enough to hang off conduit on a wall or pole.
5) Will the Red Dot S100E work as a terminal or junction enclosure rather than a receptacle box?
It will. Red Dot Dry-Tite boxes are intended for wiring devices, switches, electronic components and terminal blocks alike, so the S100E serves as a small outdoor junction or terminal enclosure with a blank cover just as readily as a device box. Its 18.3 cubic inch volume is the limiting factor on how many terminations you can fit.
How fast can I get the Red Dot S100E delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Red Dot S100E come with a warranty?
Absolutely. The Red Dot S100E is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Red Dot S100E?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Red Dot S100E from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.