You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Actuator:
- Standard
- Actuator Color:
- Red
- Bus Material:
- Plastic
- Contact Configuration:
- 2NC
- Illumination:
- Illuminated
- Light unit type:
- Incandescent, transformer
- Light Unit Voltage:
- 120 Vac
- Number Of Positions:
- Three-position
- Operating Mode:
- Momentary push and pull
- Series:
- 10250T
- Department:
- Electrical
- Product Type:
- 30.5 mm, Class I Division 2
- Product Size:
- 40 mm
- Product Details:
- 30.5 mm, Class I Division 2
- Performance Rating:
- NEMA 3, 3R, 4, 4X, 12, 13, NEC Class I Division 2, Groups B, C and D
B-LINE 10250T888RD – Frequently Asked Questions
1) Can the B-Line 10250T888RD push-pull unit be used in a Class I Division 2 hazardous area?
Yes. The 10250T888RD carries NEC Class I Division 2, Groups B, C and D ratings, along with NEMA 3, 3R, 4, 4X, 12 and 13. That combination covers outdoor, washdown, corrosive and oily/dusty industrial locations as well as the Division 2 classified area. It is not rated for Division 1 locations.
2) What size panel hole does this 10250T push-pull operator mount in?
It is a 30.5 mm operator, so it drops into the standard 30.5 mm (1-3/16 inch) panel cutout used across the Eaton 10250T line. The head itself measures 40 mm, so allow for that footprint when spacing devices on a crowded enclosure door.
3) Is the 10250T888RD a maintained or momentary push-pull switch?
Momentary in both directions. It is a three-position device with momentary push and momentary pull action, so it returns to center when released. If your control scheme needs the operator to stay latched out (a maintained pull-to-stop, for example), this is the wrong unit.
4) What contact block comes on this assembled B-Line push-pull unit?
It ships assembled with a 2NC contact configuration, two normally closed contacts. That suits stop, interlock and safety-circuit duty where the circuit opens on actuation. If you need normally open contacts for a start function, specify a different contact arrangement.
5) What voltage does the illuminated light unit on the 10250T888RD need?
The lamp circuit is 120 Vac, using an incandescent lamp with a transformer. Feed it from a 120 Vac control circuit; it is not a direct-voltage LED unit and will not run correctly off 24 V control power.
6) Is the red push-pull button on this unit lit?
Yes, the red standard actuator is illuminated, so the head lights up rather than relying on a separate pilot light beside it. Red plus illumination is the usual choice for emergency stop or stop-function stations where the operator has to find the control fast in poor light.
How fast can I get the B-LINE 10250T888RD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 10250T888RD come with a warranty?
Absolutely. The B-LINE 10250T888RD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 10250T888RD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 10250T888RD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.