You may also like
Klein Tools 646-9/16-INS 9/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Model: KLN-646-9/16-INS
9/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Features
Cushion-Grip™ handles for greater torque and comfort
Tip-Ident Quickly Identifies Nut Driver Size
Hollow shafts make it possible to work...
Klein Tools
$92.16
$42.16
Klein Tools 646-7/16-INS 7/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Model: KLN-646-7/16-INS
7/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
Features
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool and a flame retardant, impact-resistant, bright...
Klein Tools
$85.70
$35.70
Klein Tools 646-3/16 3/16-Inch Nut Driver with 6-Inch Hollow Shaft
Model: KLN-646-3/16
3/16-Inch Nut Driver with 6-Inch Hollow Shaft
Features
Cushion-Grip™ handle allows for greater torque and comfort and handle end is color coded for easy identification
Premium chrome plated for...
Klein Tools
$62.97
$12.97
Klein Tools 646-3/8-INS 3/8-Inch Insulated Nut Driver, 6-Inch Hollow Shaft
Model: KLN-646-3/8-INS
3/8-Inch Insulated Nut Driver, 6-Inch Hollow Shaft
Warnings
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to...
Klein Tools
$82.44
$32.44
Klein Tools 646-9/16 9/16-Inch Nut Driver 6-Inch Hollow Shaft
Model: KLN-646-9/16
9/16-Inch Nut Driver 6-Inch Hollow Shaft
Warnings
Always wear approved eye protection.
NOT insulated. Will NOT protect against electrical shock.
Features
Handle end is also color coded for easy...
Klein Tools
$71.09
$21.09
3/16-Inch Insulated Nut Driver 6-Inch Hollow Shaft
646-3/16-INS - spec sheet
Features
- Cushion-Grip™ handles for greater torque and comfort
- Made in USA
- Tip-Ident quickly identifies nut driver size
- Two layers of insulation provide protection against electric shock
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
- Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
- Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Tip-Ident Quickly Identifies Nut Driver Size
Warnings
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
646-3/16-INS - spec sheet
Manufacturer Resources
Product Specs
- Color Code:
- Black
- Depth:
- 9.7500 in
- Handle Material:
- High-Dielectric Plastic
- Height:
- 1.0000 in
- Insulated:
- Yes
- Magnetic:
- No
- Material:
- Steel
- Measurement Standard:
- SAE
- Nut Driver Sizes:
- 3/16"
- Overall Length:
- 9.75" (24.8 cm)
- Shaft Length:
- 6" (15.2 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Hollow
- Weight:
- 0.1500 lbs
- Width:
- 1.0000 in