Metallics JSHC34112 3/4-10 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$337.50
Image coming soon

Metallics JSHC34112 3/4-10 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC34112

In Stock (leaves warehouse same day if ordered before 3pm ET)

$337.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/4-10 x 1-1/2 in. Socket Head Hex Cap Screws - Alloy Steel Black - 25qty

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

  • Features

    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)
    • Alloy Steel Black Material
    • Socket head with Hex Drive
    • 3/4-10 Diameter, 1-1/2" Length
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.

Manufacturer Resources

Product Specs

Minimum Purchase:
25 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.74 - 0.75 in.
Fastener Head Type:
Socket
Fastener Head Width:
1.107 - 1.125 in.
Fastener Length:
1/1/02
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C39
Hex Size:
8-May
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
25
Order Minimum Uom Imperial:
EA
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
5.75 in
Product Length:
3.5 in
Product Weight:
2.48 lbs
Product Width:
3.5 in
Slot Depth:
0.37
Sub Division:
Electrical-E H2
Tensile Strength:
170000 psi minimum
Thread Per Inch:
10
Thread Type:
UN
Wall Thickness:
0.285
Yield Strength:
162000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC34112 – Frequently Asked Questions

1) What thread does the Metallics JSHC34112 socket head cap screw have, and will it thread into a 3/4-10 tapped hole?
It's a 3/4-10 UN thread, 10 threads per inch, so it mates with any standard 3/4-10 UNC tapped hole or nut. Usable length is 1-1/2 inches under the head, which is the figure to check against your material thickness plus thread engagement.
2) How strong is this socket head cap screw compared with a Grade 5 or Grade 8 hex bolt?
Alloy steel at 170,000 psi minimum tensile and 162,000 psi minimum yield, hardened to Rockwell C39. That puts it above equivalent-size Grade 5 and Grade 8 hex head cap screws on tensile strength, and because it's wrenched internally with a hex key it needs less surface area or counterbore clearance around the head.
3) What size counterbore do I need for the head on this 3/4-10 socket cap screw?
Head width runs 1.107 to 1.125 inches and head height is 0.74 to 0.75 inches, so a counterbore has to clear 1-1/8 inches across and at least 3/4 inch deep if you want the head flush or below the surface. The screw is made to ASME B18.3-2012, so standard socket head counterbore charts apply.
4) Do these Metallics socket head cap screws qualify for Buy American or ARRA domestic-content requirements?
No. The JSHC34112 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If your job carries a domestic-content clause, this part won't satisfy it.
5) What size hex key drives this screw?
It takes a hex (Allen) key in the socket, with a socket depth of 0.37 inch. The 3/4-10 socket head cap screw is internally wrenched, so you need a hex key or hex bit socket, not a wrench on the outside of the head.
6) Is this screw plated or coated for corrosion resistance?
The finish is plain black alloy steel, no plating. That's a dry, largely unprotected surface, so for wet or outdoor work you'll want to keep it painted, oiled, or inside a dry enclosure. Indoor electrical, plumbing, and HVAC assembly is where this one belongs.
7) How are these cap screws packaged and is there a minimum order?
They ship in a jar, with a 25 each minimum order. If you need a different length, diameter, or pack count in the SHC socket head cap screw line, other sizes and quantities are available by request.
How fast can I get the Metallics JSHC34112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC34112 come with a warranty?
Absolutely. The Metallics JSHC34112 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC34112?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC34112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!