You may also like
Klein Tools 51604 Iron Conduit Bender Full Assembly, 3/4-Inch EMT with Angle Setter™
Model: KLN-51604
Iron Conduit Bender Full Assembly, 3/4-Inch EMT with Angle Setter™
Warnings
Always wear approved eye protection.
Use a safe work position to avoid loss of balance.
Features
Patent Pending Angle...
Klein Tools
$165.71
$115.71
Klein Tools 51607 Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT with Angle Setter™
Model: KLN-51607
Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT with Angle Setter™
Features
Includes markings for 10-Degrees, 22.5-Degrees, 30-Degrees, 45-Degrees, 60-Degrees and corresponding offset...
Klein Tools
$117.50
$67.50
Klein Tools 51605 Iron Conduit Bender Full Assembly, 1-Inch EMT with Angle Setter™
Model: KLN-51605
Iron Conduit Bender Full Assembly, 1-Inch EMT with Angle Setter™
Warnings
Always wear approved eye protection.
Use a safe work position to avoid loss of balance.
Features
Patent Pending Angle...
Klein Tools
$210.70
$160.70
3/4-Inch Angle Setter™
51612 - spec sheet
Warnings
- Always wear approved eye protection.
- Use a safe work position to avoid loss of balance.
Features
- Also available in 1/2-Inch (Cat. No. 51611) and 1-Inch (Cat. No. 51613)
- Conduit insets into bender head, bend as usual until the conduit makes contact with the setter
- Align the angle lines on the Angle Setter with the bender, ensure the alignment tabs are fully seated in the bender track notches, press the Angle Setter firmly into place
- Made in the USA Angle Setters create a hard stop for fast, accurate bending
- Compatible with Klein Tools' 3/4-Inch Aluminum Conduit Bender (Cat. No. 51607)
- Patent Pending Technology
- Movable for four different bend angles - 10-Degree, 22.5-Degree, 30-Degree, 45-Degree (adjusted for conduit spring back)
- Klein’s unique Angle Setter™ technology for quick, accurate repeated bends saving time on the job (Patent Pending)
51612 - spec sheet
Manufacturer Resources
Product Specs
- Conduit Size:
- 3/4"
- Depth:
- 7.1400 in
- For Use With:
- Conduit Benders Cat. Nos. 51604, 51607; Conduit Bender Head Cat. No. 51609
- Height:
- 1.3700 in
- Marking:
- 10°, 22.5°, 30°, 45°
- Material:
- Delrin® Plastic
- Overall Height:
- 1.0" (2.6 cm)
- Overall Length:
- 2.4" (6.1 cm)
- Overall Width:
- 1.0" (2.6 cm)
- Rigid Imc:
- 1/2" (1.3 cm)
- Thinwall Emt:
- 3/4" (1.9 cm)
- Type:
- Angle Setter™
- Weight:
- 0.0800 lbs
- Width:
- 3.7100 in