Klein Tools 50506SEN 3/4-Inch ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$74.30
$16.88
Klein Tools 50506SEN 3/4-Inch PVC Cutter

Klein Tools 50506SEN 3/4-Inch PVC Cutter

(No reviews yet) Write a Review

Model: 50506SEN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$74.30
$16.88
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/4-Inch PVC Cutter

  • Features

    • Reversible blade doubles life
    • Cuts up to 3/4-Inch schedule 40 PVC
    • Cuts 1-3/8-Inch O.D. flexible plastic pipe
    • Handle latch keeps tool closed
    • Makes clean burr-free cuts in PVC and flexible pipe
    • Replacement blade available (Cat. No. 50549)

  • Warnings

    • Never use on or near live electrical circuits.
    • Do NOT use to cut metallic pipes or cable wire.
    • Do NOT cut cold PVC.
    • Always wear approved eye protection.


50506SEN - spec sheet

Manufacturer Resources

Product Specs

Body Material:
Steel
Item Depth:
8.5000 in
Item Height:
1.0000 in
Item Weight:
1.0000 lbs
Item Width:
1.0000 in
Non Metallic Tubing Cutting Capacity:
1" (2.5 cm) Non-Metallic Tubing Cutting, 1-3/8" (3.5 cm) Flexible Pipe Cutting
Overall Length:
8.5" (21.6 cm)
Pvc Cutting Capacity:
Up to 3/4" (1.9 cm) Schedule 40
Replacement Parts:
50549
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Pliers & Cutters
Product Material:
Steel
Product Weight:
1.0 lb (0.5 kg)

Klein Tools 50506SEN – Frequently Asked Questions

1) Can this Klein PVC cutter cut flexible plastic pipe and non-metallic tubing, not just rigid conduit?
Yes. Besides rigid PVC, the 50506SEN is rated for 1 inch non-metallic tubing and flexible pipe up to 1-3/8 inch outside diameter. That makes it usable on poly tubing and flexible pipe runs as well as conduit, with a bigger capacity on flex than on rigid PVC.
2) Will a PVC cutter like this work on EMT or metal conduit?
No. The 50506SEN must not be used on metallic pipe or cable wire, and it should never be used on or near live electrical circuits. For EMT and rigid metal conduit you need a tubing cutter or a bandsaw, not a shear-type PVC cutter. The blade here is ground for plastic and metal will destroy it.
3) What do I order when the blade on the Klein 50506SEN gets dull?
Klein Cat. No. 50549 is the replacement blade for the 50506SEN. Before you replace it, note the blade is reversible, so flipping it gives you a second cutting edge and doubles the service life. Crews standardizing on this tool usually keep a couple of 50549 blades in the van.
4) Does this cutter leave a burr that has to be reamed before gluing?
Clean, burr-free cuts are what this tool is built for in PVC and flexible pipe, so in most cases you can go straight to solvent cement without reaming. One working condition matters: do not cut cold PVC. Chilled pipe cracks and chips under a shear blade rather than slicing cleanly, so warm the pipe if it has been sitting outside in the cold.
5) How big is the Klein 50506SEN and is it small enough to carry on a tool belt?
It is 8.5 inches overall and weighs 1 pound, with a handle latch that keeps the tool closed when it is not in use. That latch is what makes it pouch and bucket friendly, since the jaws will not spring open against the rest of your tools.
6) Is the Klein 50506SEN durable enough for daily use by a maintenance crew?
The tool is steel bodied, and the wear item is the blade rather than the frame. Reversing the blade gives a second edge, and Cat. No. 50549 replaces it when both edges are done, so a facility can keep the same cutters in service instead of scrapping them. Eye protection should be worn on every cut.
How fast can I get the Klein Tools 50506SEN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 50506SEN come with a warranty?
Absolutely. The Klein Tools 50506SEN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 50506SEN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 50506SEN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!