You may also like
3/4 XH GALV MI AAR 90 ELL
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.75
- Size 2:
- 0.75
- Strength:
- XH
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Elbows
- Product Type:
- 90° Elbow
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.69 lbs
ASC Engineered Solutions 311500805 – Frequently Asked Questions
1) What size and thread type are the openings on the ASC 3/4 inch extra heavy galvanized 90 degree elbow?
Both ends are 3/4 inch female pipe thread (FPT), so it takes 3/4 inch male threaded pipe on each side and turns the run 90 degrees. Threads are cut to ASME B1.20.1, the standard NPT taper thread spec, so it mates with standard 3/4 inch threaded steel or iron pipe nipples.
2) Is the galvanizing on this ASC elbow suitable for outdoor or wet service?
The coating is hot dip galvanizing to ASTM A-153, the spec covering zinc coating on iron and steel hardware. That is the finish normally specified for corrosion protection on threaded fittings in wet, damp, or exterior runs, and it is what galvanized sprinkler and water piping is matched with. Pair it with galvanized pipe and galvanized nipples so you are not mixing black iron into the same run.
3) What material spec does this 3/4 inch 90 degree elbow meet, and can I use it on a job that calls out ASTM A197?
The casting is malleable iron produced to ASTM A-197, so it meets an A197 callout directly. Dimensions and pressure rating are both to ASME B16.3 and threads to ASME B1.20.1, which is the full spec stack most mechanical submittals ask for on threaded malleable fittings.
4) Will this elbow work with copper, PEX, or grooved pipe?
No. Both ends are female NPT threads, so it only joins to male threaded pipe, 3/4 inch. For copper you need a sweat or press fitting, for PEX a crimp or expansion fitting, and for grooved systems a grooved 90. If you're transitioning from threaded steel to another material, make that change at a dedicated adapter, not at this elbow.
5) What is the part number and weight on the ASC 3/4 inch XH galvanized 90 ell for my submittal?
Order it as ASC Engineered Solutions part 311500805. Each fitting weighs 0.69 lbs, which is what you'll want for calculating hanger loads and freight on a bulk pull.
How fast can I get the ASC Engineered Solutions 311500805 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311500805 come with a warranty?
Absolutely. The ASC Engineered Solutions 311500805 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311500805?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311500805 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.