You may also like
3/4X1/2X3/4 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.75
- Size 2:
- 0.5
- Size 3:
- 0.75
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 0.52 lbs
ASC Engineered Solutions 311038707 – Frequently Asked Questions
1) What are the port sizes on the ASC Engineered Solutions 3/4 x 1/2 x 3/4 galvanized malleable iron tee?
It's a reducing tee with 3/4 inch run ends and a 1/2 inch branch. The run takes 3/4 inch pipe straight through, and the outlet in the middle drops to 1/2 inch, which is the usual way to pick up a fixture or gauge line off a 3/4 inch main without adding a bushing.
2) Are all three openings on this galvanized malleable iron tee female threaded?
All three ports are FPT, female pipe thread, so threaded male pipe or nipples screw into each opening. Threads are cut to ASME B1.20.1, the standard NPT tapered thread spec, so it mates with any standard NPT male end.
3) Can I use this malleable iron tee on a fire sprinkler line?
It carries a UL/FM listing, so it is acceptable for fire protection piping where a listed fitting is required. It is standard weight (STD) malleable iron with pressure ratings per ASME B16.3. Confirm the pressure class on your drawing matches the standard-weight rating for the size.
4) Is a galvanized malleable iron tee okay for a wet or damp location?
The galvanized coating is applied to ASTM A-153, the hot-dip spec for hardware, which is what you want for water lines and damp or exposed runs where black iron would rust. The body itself is malleable iron to ASTM A-197.
5) Will this tee match the dimensions on my piping drawing?
Center-to-end dimensions follow ASME B16.3, the dimensional standard for threaded malleable iron fittings, so it interchanges with any other B16.3 fitting of the same size and class in a laid-out run.
6) What is the ASC Engineered Solutions part number for this reducing tee?
MPN 311038707, an ASC Engineered Solutions galvanized malleable iron tee in 3/4 x 1/2 x 3/4.
7) How much does this 3/4 x 1/2 x 3/4 galvanized tee weigh?
0.52 lbs each. Worth knowing if you're spec'ing hanger spacing or building out a bulk MRO order of threaded fittings.
How fast can I get the ASC Engineered Solutions 311038707 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311038707 come with a warranty?
Absolutely. The ASC Engineered Solutions 311038707 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311038707?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311038707 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.