You may also like
3/4X3/8X3/8 BLK MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 0.75
- Size 2:
- 0.375
- Size 3:
- 0.375
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Black
- Product Material:
- Malleable Iron
- Product Weight:
- 0.36 lbs
ASC Engineered Solutions 310039201 – Frequently Asked Questions
1) What are the three port sizes on the ASC 3/4 x 3/8 x 3/8 black malleable iron tee?
It's a reducing tee with a 3/4 inch run and two 3/8 inch outlets. All three ports are female pipe thread (FPT), so it takes male-threaded pipe nipples on every side. Handy where you need to branch two small 3/8 inch lines off a 3/4 inch run without stacking bushings.
2) Can I use a black malleable iron tee on a gas line?
Black malleable iron threaded fittings are the standard choice for black iron gas piping, and this one is built to the usual specs for that work: ASTM A-197 malleable iron, ASME B16.3 dimensions and pressure class, and NPT threads per ASME B1.20.1. Black finish means no galvanizing, so it's for gas and non-potable service, not domestic water.
3) Is this a standard weight or extra heavy malleable iron fitting?
Standard weight (STD), with dimensions and pressure class to ASME B16.3 Class 150. If your spec calls for extra heavy or Class 300 malleable iron, this isn't the part.
4) Is this tee UL listed or FM approved?
Yes, the 3/4 x 3/8 x 3/8 black malleable iron tee carries UL/FM recognition, which is what a fire protection or insurance-driven spec usually asks for on threaded iron fittings.
5) What's the difference between this reducing tee and using a straight 3/4 tee with bushings?
A 3/4 x 3/8 x 3/8 reducing tee does the reduction inside the casting, so you install one fitting instead of a 3/4 tee plus two 3/4-to-3/8 bushings. Fewer threaded joints means fewer leak paths and less takeout length, which matters in tight mechanical rooms. Bushings are the fallback when the reducing tee you need isn't a stocked combination.
6) How much does this 3/4 x 3/8 x 3/8 malleable iron tee weigh?
0.36 lbs each. Worth knowing when you're pricing freight on a bulk MRO order or figuring hanger spacing on a long run of small branch lines.
7) What is the manufacturer part number for this ASC black iron tee?
ASC Engineered Solutions part number 310039201, the 3/4 x 3/8 x 3/8 black malleable iron tee. That's the number to quote when standardizing a facility's fitting stock.
How fast can I get the ASC Engineered Solutions 310039201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 310039201 come with a warranty?
Absolutely. The ASC Engineered Solutions 310039201 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 310039201?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 310039201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.