You may also like
3/8-1 GROUND CLAMP BRONZE LAYIN
Manufacturer Resources
Product Specs
- Country Of Origin:
- India (IN)
- Product Group:
- Grounding & Bonding
- Product Type:
- Grounding devices or assemblies
- Selling Unit Of Measure:
- each
- Type2:
- Grounding devices or assemblies
- Department:
- Electrical
- Product Subgroup:
- Ground Clamps
Blackburn JDLI-B1-10 – Frequently Asked Questions
1) What pipe or rod size does the Blackburn JDLI-B1-10 ground clamp fit?
The JDLI-B1-10 is sized for 3/8 inch through 1 inch, so it covers the common small water pipe and ground rod range in that span. If your rod or pipe falls outside 3/8 to 1 inch, you need a different clamp body.
2) What is a lay-in ground clamp and why would I use one instead of a standard pipe clamp?
A lay-in clamp has an open channel so the grounding conductor drops in from the side and is captured by the pressure bar, instead of being threaded through a closed hole. That matters when the conductor is already run, terminated at the other end, or too stiff to fish, which is the usual situation on a service retrofit. The JDLI-B1-10 is that style, sized 3/8 to 1 inch.
3) Is the Blackburn JDLI-B1-10 clamp suitable for direct burial or a damp meter base location?
The clamp body is bronze, which is the material normally specified where a grounding connection sits in a wet or buried location because it resists corrosion and is compatible with copper conductors. Bronze is also what avoids the dissimilar-metal problem you get pairing steel hardware with a copper ground wire.
4) Can I use the Blackburn JDLI-B1-10 on rigid conduit as well as water pipe?
The clamp is a general grounding clamp rated by trade size, 3/8 to 1 inch, not by what the round surface happens to be, so it will seat on pipe or conduit within that range. Bronze body keeps the connection to a copper grounding electrode conductor from setting up galvanic corrosion.
5) Does the JDLI-B1-10 come as a single clamp or in a box quantity?
It sells as each, so one order quantity equals one clamp. Buyers standardizing a service or panel rollout should order the count they need per connection point rather than assuming a carton.
6) What is the exact part number and manufacturer for this bronze lay-in ground clamp?
It is Blackburn part number JDLI-B1-10, a bronze lay-in ground clamp for 3/8 to 1 inch. Country of origin is India.
How fast can I get the Blackburn JDLI-B1-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn JDLI-B1-10 come with a warranty?
Absolutely. The Blackburn JDLI-B1-10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn JDLI-B1-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn JDLI-B1-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.