Klein Tools 602-10 3/8-Inch Ke...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.19
$23.77
Klein Tools 602-10 3/8-Inch Keystone Screwdriver 10-Inch Shank

Klein Tools 602-10 3/8-Inch Keystone Screwdriver 10-Inch Shank

(No reviews yet) Write a Review

Model: 602-10
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.19
$23.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3/8-Inch Keystone Screwdriver 10-Inch Shank

  • Features

    • Special heat-treated shafts
    • Tip-Ident® quickly identifies the screwdriver type and tip orientation
    • Meets or exceeds applicable ASME / ANSI specifications
    • Built to handle the tough jobs with ease
    • Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
    • Made in USA
    • Hex bolster reinforces shank for hard use and allows wrench assisted turning
    • Internal flanges inside handle provide solid, twist-resistant blade anchor

  • Warnings

    • Do NOT use to pry or chisel.
    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.


602-10 - spec sheet

Manufacturer Resources

Product Specs

Handle Color:
Black
Handle Material:
Rubber
Insulated:
No
Item Depth:
15.4380 in
Item Height:
1.1250 in
Item Weight:
0.6000 lbs
Item Width:
2.3670 in
Magnetic:
No
Overall Length:
15.438" (39.2 cm)
Shank Length:
10" (25.4 cm)
Shank Type:
Round
Tip Size:
3/8" (9.5 mm)
Tip Type:
Keystone
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Steel
Product Weight:
9.6 oz (272 g)
Product Type:
Hardware

Klein Tools 602-10 – Frequently Asked Questions

1) Is the Klein Tools 602-10 screwdriver insulated for live electrical work?
No. The 602-10 is not insulated and will not protect against electrical shock. Klein states that outright in its warnings, so it should not be used on energized circuits. If you need a driver for live work, look for a Klein insulated (1000V rated) screwdriver instead. The 602-10 is a general-purpose slotted driver for de-energized work.
2) What size slotted screws does the Klein 602-10 keystone screwdriver fit?
The tip is 3/8 inch (9.5 mm) wide with a keystone (flared) grind, which suits larger slotted fasteners such as panel screws, terminal lugs and heavy machine screws. A keystone tip is thicker at the shoulder than a cabinet tip, so it will not seat in a deep, narrow counterbored slot the way a cabinet-tip driver does.
3) How long is the Klein 602-10 screwdriver overall, and will it reach into a deep panel?
Shank length is 10 inches (25.4 cm) and overall length with the handle is 15.438 inches (39.2 cm). That reach gets you to terminals at the back of a deep enclosure or down a gang box without pulling the device. In a tight enclosure where 15-plus inches won't swing, a shorter-shank 3/8 inch keystone driver is the better call.
4) Can you put a wrench on the Klein 602-10 to get more torque?
Yes. The 602-10 has a hex bolster at the base of the shank that reinforces the shaft and takes an open-end wrench for assisted turning on seized fasteners. The shank is round steel, heat treated, and anchored in the handle by internal flanges to resist twisting. Klein still warns against using it to pry or chisel.
5) Does the Klein 602-10 screwdriver meet a recognized hand tool standard for institutional purchasing?
Klein states the 602-10 meets or exceeds applicable ASME/ANSI specifications for screwdrivers, and the tool is made in the USA. Those two points usually cover what MRO and government buyers need for a standardized tool crib spec. No insulation rating applies, since this is a non-insulated driver.
6) Is the Klein 602-10 tip magnetic for holding screws in place?
No, the tip is not magnetized. You'll need to start and hold the screw by hand, or use a separate magnetizer. Worth knowing if you're working overhead in a panel where a dropped screw disappears.
7) What kind of handle does the Klein 602-10 have, and how much does the tool weigh?
It uses Klein's Cushion-Grip rubber handle in black, sized for torque and comfort on repeated turns, with internal flanges inside the handle anchoring the blade. Tool weight is 9.6 oz (272 g), so it carries fine in a pouch alongside the rest of your drivers.
8) How do I tell the 602-10 apart from the other Klein drivers in my pouch without pulling it out?
Klein puts Tip-Ident on the handle end, which shows the screwdriver type and tip orientation at a glance, so you can pick the 3/8 inch keystone slotted out of a roll without reading the shank. The chrome-plated finish also helps with corrosion resistance in a damp truck box.
How fast can I get the Klein Tools 602-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 602-10 come with a warranty?
Absolutely. The Klein Tools 602-10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 602-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 602-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!