3M, ScotchCode, Wire Marker Tape Refill Roll SDR-0, 50 Rolls/Case
7000058254 - spec sheet
Features
- High tack, acrylic adhesive that resists solvents, oil and water and adheres firmly to insulation surfaces
- Available in ten NEMA colors, individual numbers and consecutive numbers, letters and symbols
- Can be used for applications with operating temperatures between -40°F (-40°C) to 250°F (121°C)
7000058254 - spec sheet
Manufacturer Resources
Product Specs
- Adhesive Material:
- Acrylic
- Marker Id Style:
- Pre-printed
- Department:
- Electrical
- Wire Marker Products:
- Wire Marker Tape Dispenser and Refill Rolls
- Maximum Recommended Voltage Rating:
- 600.0 V
- Manufacturing Origin:
- USA
- Overall Length Metric:
- 2.4 m
- Country Of Origin:
- United States
- Maximum Operating Temperature Celsius:
- 121.0 Degree
- Etim Class 7 0:
- EC001530
- Legend Color:
- Black
- Units Per Case:
- 50
- Solution For:
- Access Network: FTTH/FTTB/CATV
- Voltage Application:
- Low Voltage
- Dispenser Marker Type:
- Tape Roll Refill
- Rohs Eu Comments:
- RoHS 2011/65/EU compliant without exemption
- Product Type:
- Wire Marker
- Marker Type:
- Dispenser
- Maximum Operating Temperature Fahrenheit:
- 250.0 Degree
- Ais Url Article Information Sheet:
- https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu9n_zu8l00xm8_eO8tZmv70k17zHvu9lxtD7xtBevSS
- Etim Class 8 0:
- EC001530
- Overall Width Metric:
- 5.46 mm
- Tape Color:
- White
- Maximum Insulation Outer Diameter Metric:
- 3.7 mm
- Product Material:
- Plastic
- Maximum Insulation Outside Diameter:
- 0.145 in
- Rds Url Regulatory Data Sheet:
- https://cdmsweb.3m.com/ingredientcommunication/file/Media/uoNmTNLXL4Q=
- Uv Resistant:
- No
- Product Group:
- Cable Management & Identification
- Product Subgroup:
- Wire Markers & Labels
- Application:
- Marking Wire and Cable
3M 7000058254 – Frequently Asked Questions
1) What wire size can the 3M ScotchCode SDR refill tape wrap around?
The SDR refill rolls are sized for wire with an insulation outside diameter up to 0.145 in (3.7 mm). Anything with a larger jacket than that will not wrap cleanly with these rolls, so for heavier cable you need a larger ScotchCode marker format.
2) Which numbers come in the 3M ScotchCode SDR refill rolls?
Refill rolls are pre-printed with a single repeating character per roll: SDR-0, SDR-3, SDR-4, SDR-5, SDR-6, SDR-7, SDR-8 and SDR-9. Pick the digit you need, roll by roll. Printing is black on white tape.
3) Do the ScotchCode SDR rolls work in the 3M wire marker tape dispenser, or are they standalone?
They are dispenser refills, not a standalone book or card. The SDR rolls load into the ScotchCode wire marker tape dispenser, so you need the dispenser on hand to use them.
4) Will 3M ScotchCode wire markers stay on in a hot mechanical room or a cold outdoor pull box?
Operating range runs from -40 F (-40 C) up to 250 F (121 C), and the acrylic adhesive resists solvents, oil and water. One caution for exterior work: the tape is not UV resistant, so sustained direct sunlight is not an application for it.
5) Are ScotchCode SDR markers rated for 600 volt branch circuit conductors?
Maximum recommended voltage rating is 600 V, and the product is classed for low voltage applications, which covers typical branch circuits, control wiring and panel feeders. Do not use them on medium or high voltage cable.
6) How many rolls are in a case of 3M ScotchCode SDR wire marker tape?
A case holds 50 rolls, and the case is a single-character case, so 50 rolls of the same digit. If you are labeling circuits 1 through 12 across a panel job, you are ordering a case per digit rather than one mixed case.
7) Are 3M ScotchCode wire markers RoHS compliant and where are they made?
They are RoHS 2011/65/EU compliant without exemption, and country of origin is the United States. For submittals, 3M publishes both an article information sheet and a regulatory data sheet for the product.
8) Can I write my own labels on these, or are the characters fixed?
The characters are fixed. SDR rolls are pre-printed, one repeating digit per roll, so you build a number by pulling marks from several rolls in sequence. If you need custom text or barcodes, this is the wrong format and you want a printable marker system instead.
9) How much tape is on one ScotchCode SDR refill roll and how wide is it?
Each roll carries 2.4 m of tape at 5.46 mm wide. That narrow width is what lets the marker wrap small conductors without overlapping itself, and at 2.4 m a single roll covers a lot of marks before you swap it.
10) Is ScotchCode SDR tape suitable for marking fiber and communications drops, not just power wire?
Yes. The application is marking wire and cable generally, and 3M lists it as a solution for access network work including FTTH, FTTB and CATV. The plastic tape and acrylic adhesive stick to insulation jackets, and the 0.145 in maximum OD suits small drop cable.
How fast can I get the 3M 7000058254 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7000058254 come with a warranty?
Absolutely. The 3M 7000058254 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7000058254?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the 3M 7000058254 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.