You may also like
3X11/2 GALV MI REDUCER
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 3
- Size 2:
- 1.5
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Plumbing Fittings
- Product Subgroup:
- Reducers
- Product Type:
- Reducer
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 3.47 lbs
ASC Engineered Solutions 311091201 – Frequently Asked Questions
1) What size pipe does the ASC 3 x 1-1/2 galvanized malleable iron reducer connect?
It takes 3 inch pipe on the large end and 1-1/2 inch on the small end, both female pipe thread (FPT). So it threads onto male NPT pipe ends or male-threaded nipples on each side, not onto plain unthreaded pipe.
2) Is this malleable iron reducer approved for fire sprinkler piping?
It carries UL/FM approval, which is what a sprinkler contractor needs for fittings on a fire protection line. It is galvanized malleable iron, standard pattern, dimensioned to ASME B16.3.
3) Can I use a galvanized malleable iron reducer on a wet or outdoor line?
The galvanized coating is applied to ASTM A-153, hot-dip galvanizing for iron and steel hardware, so it holds up in damp service and on dry-pipe or exposed runs better than black iron. The body is malleable iron to ASTM A-197.
4) Should I use a threaded reducer or a bushing to go from 3 inch to 1-1/2 inch?
This part is a reducing coupling: female threads on both ends, so it sits between two male pipe ends and shortens the run by its own length. A bushing is male on the large side and screws into an existing female port instead. Pick the reducer when you are joining two threaded pipe ends; pick a bushing when you are stepping down out of a female fitting or valve.
5) What is the ASC part number for the 3 x 1-1/2 inch galvanized malleable reducer?
Order it as ASC Engineered Solutions part 311091201. That is the galvanized malleable iron, standard pattern, 3 inch by 1-1/2 inch FPT reducer.
How fast can I get the ASC Engineered Solutions 311091201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311091201 come with a warranty?
Absolutely. The ASC Engineered Solutions 311091201 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311091201?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311091201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.