You may also like
3X2X3 GALV MI TEE
Manufacturer Resources
Product Specs
- Dimensions Specification:
- ASME B16.3
- End Conn Size 1:
- FPT
- End Conn Size 2:
- FPT
- End Conn Size 3:
- FPT
- Finish Specification:
- ASTM A-153
- Material Specification:
- ASTM A-197
- Pressure Rating Specification:
- ASME B16.3
- Size 1:
- 3
- Size 2:
- 2
- Size 3:
- 3
- Strength:
- STD
- Thread Specification:
- ASME B1.20.1
- Ul Fm:
- Yes
- Department:
- Plumbing
- Product Group:
- Pipe Fittings
- Product Subgroup:
- Tees
- Product Type:
- Tee
- Product Finish:
- Galvanized
- Product Material:
- Malleable Iron
- Product Weight:
- 5.83 lbs
ASC Engineered Solutions 311056006 – Frequently Asked Questions
1) What size openings does the ASC 3x2x3 galvanized malleable iron tee have, and which port is the reducing one?
It's a reducing tee with two 3 inch run ends and a 2 inch branch. All three openings are female pipe thread (FPT), so pipe threads into each one. Use it where a 2 inch branch line comes off a 3 inch main.
2) Is this tee UL Listed and FM Approved for a fire sprinkler line?
Yes, the ASC 3x2x3 galvanized malleable iron tee carries UL/FM recognition, which is what an inspector looks for on fire protection piping. It's a standard (STD) class fitting dimensioned to ASME B16.3.
3) Is the galvanizing on this malleable iron tee suitable for wet or outdoor pipe runs?
The coating is hot dip galvanizing to ASTM A-153, the spec for zinc coatings on iron hardware, on a malleable iron body made to ASTM A-197. That's the usual choice for wet-pipe sprinkler systems and damp or exterior locations where black iron would rust out.
4) Will this tee line up with my existing threaded fittings, or do I need to re-measure the takeout?
Center-to-end dimensions follow ASME B16.3, the same standard other malleable iron threaded fittings are built to, so the takeout matches what you'd get from any conforming 3x2x3 reducing tee. Pipe cut lengths from an existing layout carry over.
5) Is this a Class 150 standard fitting or an extra heavy one?
Standard (STD) class, with the pressure rating taken from ASME B16.3. If your spec calls for extra heavy malleable iron on that run, this is not the fitting for it.
6) How heavy is a 3x2x3 malleable iron tee for overhead hanger sizing?
About 5.83 lbs for the fitting alone. Add that to the filled pipe weight when you size hangers or figure the load at a branch point overhead.
7) What part number do I order for the ASC 3x2x3 galvanized tee?
The manufacturer part number is 311056006 from ASC Engineered Solutions. It's a single configuration, no options to specify beyond that.
How fast can I get the ASC Engineered Solutions 311056006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ASC Engineered Solutions 311056006 come with a warranty?
Absolutely. The ASC Engineered Solutions 311056006 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ASC Engineered Solutions 311056006?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ASC Engineered Solutions 311056006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.