Metallics JPMP119 4-40 x 1 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.26
$0.26
Metallics JPMP119 4-40 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JPMP119 4-40 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JPMP119
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.26
$0.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
4-40 x 1 in. Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • 4-40 Diameter, 1" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#1
Fastener Head Height:
0.07 - 0.08 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.205 - 0.219 in.
Fastener Length:
1
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_St_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Phillips Recess Diameter:
0.115
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.4 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.053 - 0.071
Sub Division:
Electrical-E H2
Tensile Strength:
60000 psi minimum
Thread Per Inch:
40
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
PMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JPMP119 – Frequently Asked Questions

1) What thread size and length are the Metallics JPMP119 machine screws?
JPMP119 is a 4-40 machine screw, 1 inch long. The 40 threads per inch is the standard coarse (UNC) pitch for a #4 screw, so it mates with any 4-40 tapped hole or 4-40 nut. Thread form and head geometry follow ASME B18.6.3-2010.
2) Will a 4-40 pan head screw fit through a standard device or plate hole without the head pulling through?
The pan head measures 0.205 to 0.219 in. across with a head height of 0.07 to 0.08 in. That gives a bearing surface noticeably wider than the #4 shank, so it seats over a clearance hole rather than pulling through, and the low head profile sits close to flush on a cover plate or a sheet metal box ear.
3) What size Phillips driver do I need for these 4-40 pan head screws?
A #1 Phillips bit. The recess diameter is 0.115 in. with a gaging depth of 0.053 to 0.071 in., so a #2 bit will cam out and chew the recess. Keep a #1 in the pouch if you are running these in quantity.
4) Are these zinc plated steel screws OK for an outdoor or damp location?
These are carbon steel with a zinc finish, made from AISI 1006 to 1022 stock. Zinc plating is a mild indoor corrosion coating. For wet, coastal, or washdown locations, specify a stainless machine screw of the same 4-40 x 1 in. size instead.
5) How strong are the Metallics PMP 4-40 machine screws?
Rated at 60,000 psi minimum tensile with a hardness of Rockwell B70 to B100. That is standard low carbon commercial grade, fine for mounting devices, plates, enclosure covers and terminal hardware. It is not a structural fastener.
6) Do these machine screws meet Buy American / ARRA requirements for a government job?
Metallics lists the JPMP119 as both ARRA compliant and Buy American compliant. Country of origin is recorded as multiple, so if your contract requires a single named origin on the submittal, confirm the origin on the lot you receive.
7) Is 1 inch too long for mounting a device in a shallow box?
At 1 inch of length under the head, these are longer than the typical device screw and are meant for stacking through spacers, thick plates, or deep standoffs. If the screw bottoms out or protrudes into wiring space, step down to a shorter 4-40. Other lengths and quantities in the PMP line are available by request.
8) How are the JPMP119 screws packaged and what is the minimum order?
They ship in a jar of 100, which is the order minimum. Shop weight of the jar is 0.4 lbs. Handy if you are stocking a van or a maintenance cabinet rather than buying loose pieces.
How fast can I get the Metallics JPMP119 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JPMP119 come with a warranty?
Absolutely. The Metallics JPMP119 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JPMP119?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JPMP119 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!