Metallics F48PHD 48in Post Hole Digger St w/Fib

The F48PHD is a 48 inch post hole digger with fiberglass handles. It's the clamshell style tool used to dig narrow, deep holes for fence posts, sign posts, and pole or anchor sets, where a shovel would widen the hole too much. Fiberglass handles don't rot or swell the way wood does if the tool gets left out in the weather.

At 48 inches the F48PHD is the standard contractor length for residential fence and sign post work, which typically means holes in the 2 to 3 foot range. The 48 inch handle length is what sets your reach down the hole, so for footings deeper than roughly 3 feet you'll be working at the limit of it and an auger or a longer digger is the better tool.

The F48PHD uses fiberglass handles, which is usually the right call for a shared crew tool: no checking, splintering, or rot if it rides in an open truck bed or sits outside overnight. Wood handles are easier to replace cheaply and absorb more shock, which some diggers prefer for all day hand work. For a fleet tool that gets abused by whoever grabs it, fiberglass holds up better.

Order Metallics F48PHD. That is the manufacturer part number and it's the only configuration of this digger, so there's no handle length or finish option to specify.