You may also like
5-1/16 to 6 Hose Clamp 18-8
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Electrical Hardware
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Conduit Clamps
Metallics HMC88SS – Frequently Asked Questions
1) What diameter range does the Metallics HMC88SS hose clamp adjust to?
The HMC88SS adjusts over a 5-1/16 to 6 inch range, so it will band around anything whose outside diameter falls inside that window. If your pipe, duct, or hose OD sits below 5-1/16 inches the band won't close down far enough, and you'd need a smaller clamp size in the series.
2) Is the Metallics HMC88SS clamp stainless steel, and will it hold up outdoors?
It's an 18-8 stainless clamp. 18-8 is the common austenitic stainless grade (roughly 18 percent chromium, 8 percent nickel) used for general corrosion resistance, which is why these get specified for damp, exterior, and washdown locations rather than plain zinc-plated bands.
3) Can I use a Metallics HMC88SS hose clamp to strap conduit or large pipe to a support?
Yes, that's a common use for a worm-drive band clamp this size. The HMC88SS is sold as electrical hardware for conduit clamping, and its 5-1/16 to 6 inch adjustment covers large conduit, pipe, and duct where you need to cinch a band around the run. For rigid, code-prepped conduit support you'd still use a listed conduit strap or hanger; the hose clamp is for banding and securing, not as a substitute for a listed support where one is required.
4) Is the Metallics HMC88SS sold as a single clamp or in one size only?
HMC88SS is a single catalog number covering the 5-1/16 to 6 inch stainless clamp. There are no finish or length options to pick, so the part number alone specifies it when you order or spec it on a submittal.
How fast can I get the Metallics HMC88SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics HMC88SS come with a warranty?
Absolutely. The Metallics HMC88SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics HMC88SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics HMC88SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.