Metallics JSHC58114 5/8-11 x 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$385.71
Image coming soon

Metallics JSHC58114 5/8-11 x 1-1/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

(No reviews yet) Write a Review

Model: JSHC58114

In Stock (leaves warehouse same day if ordered before 3pm ET)

$385.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
5/8-11 x 1-1/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - 50qty

  • Features

    • Socket head with Hex Drive
    • Supplies greater tensile strength than equivalent sizes of Grade-5 or Grade-8 hex head cap screws while requiring less surface area or counterbore since the fastener is intenally wrenched.
    • 5/8-11 Diameter, 1-1/4" Length
    • Alloy Steel Black Material
    • Elongation is 10% minimum (applies to machined specimens of lenglh at least 4D where D equals the nominal diameter of the screw) and Reduction of Area is 33% minimum (applies to machined specimens)

  • Additional Notes

    • Other sizes and quantities available by request | Cap screws of a length 3D or greater, where D equals the nominal diameter of the screw, are subject to tensile strength, yield strength, elongation and reduction of area testing.

Manufacturer Resources

Product Specs

Minimum Purchase:
50 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.3-2012
Division:
Electrical H1
Drive Type:
Hex
Fastener Head Height:
0.616 - 0.625 in.
Fastener Head Type:
Socket
Fastener Head Width:
0.921 - 0.938 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell C37
Hex Size:
2-Jan
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Socket_Head_Cap_Screw_Alloy_Zinc.pdf
Order Minimum Imperial:
50
Order Minimum Uom Imperial:
EA
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
4.5 lbs
Product Width:
4.5 in
Slot Depth:
0.307
Sub Division:
Electrical-E H2
Tensile Strength:
170000 psi minimum
Thread Per Inch:
11
Thread Type:
UN
Wall Thickness:
0.238
Yield Strength:
153000 psi minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Cap Screw
Type2:
Cap Screw
Series:
SHC
Product Finish:
Black
Product Details:
Cap Screw
Product Material:
Alloy Steel Black

Metallics JSHC58114 – Frequently Asked Questions

1) Will a 5/8-11 socket head cap screw thread into a standard 5/8 inch coarse tapped hole or nut?
Yes. The Metallics JSHC58114 is cut 5/8-11 UN thread, 11 threads per inch, which is the standard 5/8 inch coarse series. It mates with any 5/8-11 nut, coupling, or tapped hole. Thread length aside, grip is short: the screw is 1-1/4 inches long overall, so it is meant for thin assemblies or for threading deep into a tapped part, not for stacking thick members.
2) Is an alloy steel socket head cap screw stronger than a Grade 8 hex bolt?
On strength numbers, yes. The alloy steel socket head cap screw is rated at 170,000 psi minimum tensile and 153,000 psi minimum yield, above equivalent sizes of Grade 5 or Grade 8 hex head cap screws. Hardness is Rockwell C37. Where a hex head is still the better choice is open access with a wrench or impact gun, since a socket head needs a hex key seated square in the socket.
3) Can I use black alloy steel socket head cap screws outdoors or in a wet location?
Think indoors and dry. The material is alloy steel with a black finish, which is not a corrosion-resistant plating, so in damp, washdown, or exterior service it will rust. For outdoor or wet-location work pick a plated or stainless socket head screw instead. Stated field use for the black alloy screws is electrical, plumbing, heating and air conditioning work.
4) Are Metallics JSHC58114 cap screws Buy American or ARRA compliant for a federal job?
No. The JSHC58114 socket head cap screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic-content clause, these will not satisfy it.
5) Does this socket head cap screw meet the ASME B18.3 dimensional spec for inspection?
It is built to ASME B18.3-2012, the dimensional standard for socket head cap screws, so head diameter, head height, socket size and thread fall within that spec's tolerances. That matters on submittals where a drawing calls out B18.3 hardware rather than just a diameter and length.
6) How do these black alloy socket screws come packaged, and is there a minimum order?
They ship in a jar, with a minimum of 50 each. Stated product weight is 4.5 lbs. Other sizes and quantities are available by request if 50 of the 5/8-11 x 1-1/4 is not the count you need.
7) What tool drives these socket head cap screws?
Internal hex drive, so you need a hex key or hex bit socket seated in the recess rather than a wrench on the head. Socket depth is 0.307 in. Keep the key fully bottomed when you pull torque on a hardened screw at Rockwell C37, since a partially engaged key is what rounds the socket.
How fast can I get the Metallics JSHC58114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSHC58114 come with a warranty?
Absolutely. The Metallics JSHC58114 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSHC58114?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSHC58114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!