Metallics JRMB66 6-32 x 2 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JRMB66 6-32 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

Metallics JRMB66 6-32 x 2 in. Round Head Slotted Machine Screws - Brass - Each

(No reviews yet) Write a Review

Model: JRMB66
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 2 in. Round Head Slotted Machine Screws - Brass - 100qty

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

  • Features

    • Round head with slotted Drive
    • Brass Material
    • 6-32 Diameter, 2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.091 - 0.103 in.
Fastener Head Type:
Round
Fastener Head Width:
0.24 - 0.26 in.
Fastener Length:
2
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
0.785 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.045 - 0.073
Slot Depth:
0.051 - 0.068
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
JRMB
Product Details:
Machine Screw
Product Material:
Brass

Metallics JRMB66 – Frequently Asked Questions

1) Do these brass screws meet Buy American or ARRA requirements for a government job?
No. The JRMB66 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your spec carries a domestic sourcing clause, this is not the fastener for that job.
2) How much does the round head stand up off the surface, and will it sit under a cover plate?
Head height on the JRMB66 runs 0.091 to 0.103 in. with a head width of 0.24 to 0.26 in. That is a domed round head, not a flush head, so it sits proud of the surface. If you need the screw to finish flat in a countersunk hole, a round head is the wrong choice and you want a flat head 6-32 instead.
3) What driver fits the Metallics JRMB66, and will it take much torque?
Slotted drive only, so a flat blade driver. The slot is 0.039 to 0.048 in. wide and 0.051 to 0.068 in. deep, so pick a blade that fills the slot. Brass is soft and a slot has no centering, so drive these by hand or on low clutch settings; an impact driver will cam out and chew the head.
4) How are the 6-32 x 2 in. brass round head screws packaged, and what is the minimum order?
They come in a jar of 100 pieces, and 100 is the order minimum. One jar weighs 0.785 lbs. Good for a shop drawer or a van stock item rather than a count-out-five purchase.
5) Are these round head machine screws made to a dimensional standard I can put on a submittal?
Yes. Head and slot dimensions follow ASME B18.6.3, the standard for inch-series machine screws, and the thread is to ANSI/ASME B1.1. Those are the two designations to cite on a submittal for the 6-32 x 2 in. brass round head slotted screw.
6) Can I use these as a self-tapping screw into sheet metal?
No. A machine screw has a straight, blunt-ended 6-32 machine thread and needs a pre-tapped hole or a nut. Drill and tap, or pair it with a 6-32 nut. For driving straight into unprepared sheet metal you want a self-tapping or thread-cutting screw instead.
How fast can I get the Metallics JRMB66 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRMB66 come with a warranty?
Absolutely. The Metallics JRMB66 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRMB66?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRMB66 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!