Metallics TM81 6-32 x 3/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.23
$0.23
Metallics TM81 6-32 x 3/4 in. Truss Head Combo Receptacle Screws - Steel Zinc - 100qty

Metallics TM81 6-32 x 3/4 in. Truss Head Combo Receptacle Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TM81
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.23
$0.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 3/4 in. Truss Head Combo Receptacle Screws - Steel Zinc - 100qty

  • Features

    • Truss head with slotted and Phillips Drive
    • 6-32 Diameter, 3/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics TM81 – Frequently Asked Questions

1) Will the Metallics TM81 screw thread into a standard receptacle or switch yoke?
Yes. The TM81 is a 6-32 thread screw, which is the standard machine thread used on receptacle and switch mounting yokes and on device plate ears. At 3/4 inch long it gives you extra reach for mounting a device into a box that sits slightly recessed behind the wall finish.
2) Why use a 3/4 in. long 6-32 screw instead of the short screws that come with the device?
The screws packed with a receptacle are usually only long enough for a box flush with the finished wall. When drywall, tile, or a second layer of board sets the box back, those short screws run out of thread. The TM81 at 3/4 inch picks up the yoke threads again so the device pulls up tight instead of sitting loose in the opening.
3) What driver do I need for the Metallics TM81 receptacle screws?
Either a flat blade or a Phillips. The TM81 has a truss head with a combo drive, slotted and Phillips both cut into the same head, so an electrician working out of a pouch can use whichever driver is already in hand.
4) Will a truss head screw sit flat enough under a cover plate?
That is what the truss head is for. It is a wide, low-profile head, flatter and broader than a pan or round head, so it spreads bearing on the device yoke without standing proud enough to interfere with a flush cover plate.
5) Are the Metallics TM81 screws okay for damp locations or outdoor boxes?
The TM81 is steel with a zinc plating. Zinc plate handles normal interior conditions and incidental moisture, but it is a sacrificial coating, not stainless. For sustained wet, coastal, or corrosive exposure, specify a stainless 6-32 device screw instead.
6) Can I use the TM81 to mount a cover plate as well as the device?
No, not as a plate screw. Wall plates use a 6-32 oval or flat head screw with a short shank that finishes flush in the plate countersink. The TM81 is a 3/4 inch truss head, sized to fasten the device yoke to the box. Order plate screws separately.
7) Is the Metallics TM81 ordered as a single screw or by the box?
The TM81 is the 6-32 x 3/4 in. truss head combo receptacle screw in a 100 count pack, which is how shops buying for panel and device work normally stock them.
How fast can I get the Metallics TM81 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TM81 come with a warranty?
Absolutely. The Metallics TM81 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TM81?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TM81 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!