Metallics JFM10 6-32 x 5/16 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JFM10 6-32 x 5/16 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

Metallics JFM10 6-32 x 5/16 in. Flat Head Slotted Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFM10
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
6-32 x 5/16 in. Flat Head Slotted Machine Screws - Steel Zinc - 100qty

  • Features

    • Zinc yellow screws are popular in electronics applications.
    • Flat head with slotted Drive
    • 6-32 Diameter, 5/16" Length
    • Steel Zinc Material

  • Additional Notes

    • Other sizes and quantities available by request | Hardness and tensile strength standards are offered as guides only for stainless machine screws. There is currently no national standard for these performance requirements for stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-1998
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.069 - 0.083 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.238 - 0.262 in.
Fastener Length:
16-May
Hardness:
Rockwell B70-B100
Language Code:
EN
Material Standard:
AISI 1006 - 1022
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Mach_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.21 lbs
Product Width:
3 in
Slot Depth:
0.024 - 0.038
Slot Width:
0.039 - 0.048
Sub Division:
Electrical-E H2
Tensile Strength:
550 lb minimum
Thread Per Inch:
32
Thread Standard:
ANSI/ASME B1.1
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
FM and FMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JFM10 – Frequently Asked Questions

1) Will a 6-32 x 5/16 in. machine screw thread into standard electrical device boxes and switch plates?
6-32 is the standard thread used for device mounting in outlet and switch boxes, and the Metallics JFM10 is a 6-32 UNC screw with 32 threads per inch cut to ANSI/ASME B1.1. At 5/16 in. long it suits shallow taps like plaster ears, device yokes, and cover plates where a longer screw would bottom out or run past the tapped hole.
2) How many screws come in a jar of Metallics JFM10, and can I buy fewer?
The JFM10 ships as a jar of 100 screws, and 100 count is the order minimum, so a jar is the smallest unit. The jar weighs 0.21 lbs. Metallics does offer other sizes and quantities in the FM and FMP machine screw line by request.
3) Can I use these screws on a federally funded or government job with domestic preference requirements?
Metallics lists the JFM10 as ARRA compliant and Buy American compliant, with China as the country of origin. If your contract runs on a Buy American Act domestic-preference clause, that compliance flag is the vendor's own designation, so match it against the specific clause in your contract before you submit it.
4) Is a zinc plated steel machine screw okay for outdoor or damp locations?
The JFM10 is zinc plated steel. Zinc gives corrosion resistance for dry interior work, electronics enclosures, and panel assembly, but plated carbon steel will eventually rust in wet or exterior locations. For damp, wet, or coastal installs, specify stainless machine screws in the same 6-32 x 5/16 size instead.
5) Will these machine screws work in a self-tapping application or in sheet metal without a tapped hole?
No. Machine screws like the JFM10 have a blunt, uniform UNC machine thread, so they need a pre-tapped hole or a nut to engage. For bare sheet metal with no tap, use a self-drilling or sheet metal screw, or tap the hole to 6-32 first with a #36 drill.
How fast can I get the Metallics JFM10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFM10 come with a warranty?
Absolutely. The Metallics JFM10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFM10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFM10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!