IDEAL Industries 6-in-1 Stubby and 6-in-1 Multi-Bit Screwdriver & Nut Driver Combo

Both drivers in the IDEAL 35-954 set carry the same six tips: 3/16 inch and 1/4 inch slotted, #1 and #2 Phillips, and 1/4 inch and 5/16 inch hex nut driver. So the stubby and the full-length multi-bit cover an identical size range, which means you don't lose any capability when you switch to the short one in a tight box.

The two-driver combo covers reach. The full-length 6-in-1 gives you leverage and depth for panel screws, device mounting screws and cover plates at normal reach. The stubby handles the same six tips where there's no room to swing a long shaft, like inside a crowded junction box, behind a panel gutter, or under a counter. Buying them as a pair keeps one set of tip sizes across both.

Yes. Each driver in the 35-954 combo includes a 1/4 inch and a 5/16 inch hex nut driver end, which are the two sizes that cover most sheet metal screws, box and panel nuts, and grounding hardware on standard wiring work. The nut driver function is built into the same shaft as the slotted and Phillips bits, so you're not carrying separate nut drivers.

It does. Both drivers include #1 and #2 Phillips tips, and #2 is the size you'll use on the mounting screws of standard receptacles, switches and cover plates. #1 covers the smaller screws you hit on some device terminals and low-voltage hardware.

For routine wiring and maintenance, the six tips here cover the common ground: two slotted widths (3/16 and 1/4 inch), two Phillips (#1, #2) and two hex nut driver sizes (1/4 and 5/16 inch). What it won't do is Torx, square drive or specialty security bits, so if your facility uses tamper-resistant or square-drive fasteners you'll still want a dedicated bit set alongside it.

Two drivers ship together as one model, 35-954: a 6-in-1 multi-bit screwdriver and a 6-in-1 stubby. It's ordered as a single item rather than as separate pieces, so a shop standardizing on one part number for the truck stock only has to track the one number.