Metallics JGDS1V 6 x 1-1/4 in. Flat Head Phillips Deck Screws - Steel Yellow Zinc - Coarse Threads - Each

The JGDS1V #6 x 1-1/4 inch deck screws ship in a jar with a 500-piece minimum, sold by the each. So the smallest order is 500 screws in one jar, not a loose count. Metallics notes other sizes and quantities are available by request.

Phillips drive, #2 driver size. A #1 drive power bit is packed with the jar as a kit component, so if your crew is running #2 drivers you will want your own bit in the gun.

No. The JGDS1V is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If your job is federally funded with domestic-sourcing requirements, these screws will not satisfy the spec.

The JGDS1V is a steel screw with a yellow zinc dichromate finish, and Metallics rates it for all-weather wood applications as well as electrical, plumbing, and HVAC work. That dichromate coating is a corrosion-resistant plating, not stainless steel, so for standing moisture, treated lumber, or coastal exposure a stainless or coated-for-ACQ deck screw is the better call.

Yes. The flat head is made to countersink, so it pulls down flush with the surface of wood or a countersunk hole rather than standing proud like a pan or hex washer head. At 1-1/4 inch overall with a #6 shank, it is sized for securing straps, boxes, and light trim to wood studs or blocking, not for structural framing.

Coarse thread, UNC. Coarse threads bite faster and hold better in wood and softer materials, which is what this screw is built for. If you are fastening into sheet metal or a threaded machine part, a fine thread or sheet metal screw is the right choice instead.

A jar runs 1.97 lbs and measures 3 x 3 x 4.57 inches, so it drops into a van bin or a tool bag without taking a shelf. Useful if you are stocking several sizes on a service truck.