6 x 2 in. Bugle Head Phillips Drywall Screws - Steel Black Phosphate - Fine Threads - 500qty
Features
- Fine Threads
- Steel Black Phosphate Material
- Bugle Head with Phillips Drive
- Parts are usually supplied with a black phosphate finish.
- 6 Diameter, 2" Length
Additional Notes
- Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for drywall screw dimensions. These values are offered as a guide;deviations from these specifications may occur.
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 500 units
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Drive Type:
- Phillips
- Driver Size:
- #2
- Fastener Head Height:
- 0.020 - 0.031 in.
- Fastener Head Type:
- Bugle
- Fastener Head Width:
- 0.315 - 0.347 in.
- Fastener Length:
- 2
- Hardness:
- Rockwell C44
- Language Code:
- EN
- Material Standard:
- AISI 1018
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Phil_Fine_Thrd_Dry_Scr_Blk_Phos.pdf
- Order Minimum Imperial:
- 500
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Jar
- Phillips Recess Depth:
- 0.106
- Phillips Recess Diameter:
- 0.176 - 0.201
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 2.87 lbs
- Product Width:
- 4.5 in
- Screw Point Type:
- Sharp Point
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 18
- Thread Spacing:
- Fine
- Thread Type:
- UNF
- Department:
- Electrical
- Product Subgroup:
- Screws
- Product Type:
- Drywall Screw
- Type2:
- Drywall Screw
- Series:
- DWS
- Product Finish:
- Black Phosphate
- Product Details:
- Drywall Screw
- Product Material:
- Steel Black Phosphate
Metallics DWS5V – Frequently Asked Questions
1) Is black phosphate finish on drywall screws OK for exterior or damp areas?
No. Black phosphate on the DWS5V is a mild corrosion coating meant for dry interior board work, not a weather finish. For exterior sheathing, soffits, or wet rooms, specify a corrosion resistant coated or stainless screw instead.
2) What size Phillips bit do I need to drive these Metallics drywall screws?
A #2 Phillips bit. The recess is 0.106 inch deep and 0.176 to 0.201 inch across, which is standard #2 geometry, so a worn bit will cam out and chew the recess. Keep fresh #2 bits in the gun on a big board hang.
3) Will the bugle head on these screws sit flush for taping?
Yes. The bugle head measures 0.315 to 0.347 inch across with a head height of 0.020 to 0.031 inch, so the tapered underside dimples the paper and seats just below the surface without tearing it, leaving a shallow depression you can fill with compound.
4) How many drywall screws come in a jar of Metallics DWS5V, and can I buy fewer?
They ship in a jar of 500 count, and 500 is the order minimum, so that jar is the smallest buy. Each jar weighs 2.87 lbs.
5) Are these drywall screws hard enough to drive into steel studs without snapping heads?
The DWS5V is AISI 1018 steel case hardened to Rockwell C44, which is the hardness range drywall screws need so the point bites light gauge steel and the recess holds a #2 bit under gun torque. Back the gun speed off at the end of the drive and the heads will not pop.
6) Do these Metallics drywall screws meet Buy American and ARRA requirements for a public project?
The DWS5V is flagged compliant for both Buy American and ARRA, which is what a government or institutional submittal usually asks for on fasteners. Country of origin is listed as multiple.
7) Are the published head and thread dimensions on these drywall screws exact?
They are a guide, not a hard standard. There is no single industry standard for bugle head or drywall screw dimensions, so the head width, head height, and recess figures are given as ranges and slight deviation is acceptable. If a submittal needs a held tolerance, it will not be met by a general purpose drywall screw.
8) What is the exact part number to reorder these 6 x 2 inch fine thread drywall screws?
Metallics DWS5V, from the DWS drywall screw series: #6 diameter, 2 inch length, bugle head Phillips, fine UNF thread, black phosphate. That one number covers the 500 count jar.
How fast can I get the Metallics DWS5V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics DWS5V come with a warranty?
Absolutely. The Metallics DWS5V is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics DWS5V?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics DWS5V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.