Metallics JSHC716114 7/16-14 x 1-1/4 in. Socket Head Hex Cap Screws - Alloy Steel Black - Each

Yes. The Metallics JSHC716114 is cut 7/16-14 UN thread, 14 threads per inch, which is the standard coarse pitch for 7/16 inch fasteners. It mates with any 7/16-14 tapped hole, nut, or insert. Grip length is 1-1/4 inches, so the hole depth plus material stack has to suit that.

This alloy steel socket head cap screw is rated 180,000 psi minimum tensile and 162,000 psi minimum yield, with a hardness of Rockwell C39. That is above what equivalent-size Grade 5 or Grade 8 hex head cap screws deliver, and because it is wrenched internally it needs less surface area or counterbore than an external hex head of the same diameter.

The finish is plain black alloy steel, not a plated or galvanized coating, so it offers no meaningful corrosion protection. Keep these to dry interior work, enclosures, strut, and equipment mounting. For wet or exterior locations, specify a zinc plated or stainless socket cap screw instead.

No. The JSHC716114 is not Buy American compliant and is not ARRA compliant, with multiple countries of origin. For federally funded work carrying a domestic sourcing requirement, you'll need a domestically produced socket cap screw instead.

It is manufactured to ASME B18.3-2012, the dimensional standard for socket cap screws. If a drawing calls out B18.3 head and socket dimensions for a 7/16-14 screw, this conforms.

They ship in a jar of 100 pieces, and that jar is the order minimum, so it's a stocking quantity rather than a loose count. The packed jar weighs 7.01 lbs.

Yes, they are catalogued for the electrical, plumbing, heating and air conditioning trades, typical uses being equipment mounting, panel and enclosure hardware, and bracket fastening where a high strength internally wrenched screw suits a tight counterbore.