You may also like
750 AWG SIMPULL HEAD 24" PULLING DEVICE
Features
- Saves Time
- Available in sizes 1 AWG - 1000 kcmil AWG
- Staggered lengths
- Lowest Profile Available
Manufacturer Resources
Product Specs
- Items In Inner Pack:
- 5
- Batteries Included :
- No
- Batteries Required :
- No
- Commercial Residential:
- Commercial
- Csa Certified:
- No
- Does The Item Contain Mercury :
- No
- Item Extension:
- 12.6
- Item Height:
- 1.6
- Item Weight:
- 1.061
- Item Width:
- 3.9
- Master Pack Height:
- 6
- Package Length:
- 29.7
- Packaging Type:
- cardboard
- Product Color:
- Silver
- Product Material:
- Steel
Southwire SPH750-24 – Frequently Asked Questions
1) What conductor size is the Southwire SPH750-24 SIMpull head made for?
The SPH750-24 pulling head is sized for 750 kcmil conductor. Southwire builds the SIMpull head line in sizes from 1 AWG up to 1000 kcmil, so if you are pulling a different conductor size you need the matching head rather than this one. The head is a one-size-per-conductor device, not adjustable.
2) How much space does a SIMpull pulling head add in the conduit or pull box?
The SPH750-24 head measures 12.6 inches of extension, 3.9 inches wide and 1.6 inches high. That low profile and narrow width are the point of the design, so the assembly feeds through bends and sweeps without the bulk of a taped-and-basket-gripped head. Figure the 12.6 inch extension into your pull box clearance.
3) How many pulling heads come in a pack of SPH750-24?
These ship 5 heads to an inner pack, in cardboard packaging. That suits a typical three or four conductor plus ground feeder pull with a spare, which is how most contractors buy them. Order by the pack rather than the piece when you are planning a multi-conductor run.
4) Do I still need a basket grip and tape when using a Southwire SIMpull pulling head?
No. The SPH750-24 is the pulling device itself, a steel head that attaches to the 750 kcmil conductor and takes the rope directly. It replaces the time spent building up a taped head over a wire grip, which is where the time saving comes from.
5) Is the Southwire 750 SIMpull head steel, and how heavy is it to handle on a ladder or in a box?
Steel construction, silver finish, and 1.061 lb per head. Light enough to handle one-handed while you set up the pull, and the steel body is what takes the pulling load instead of tape and a wire grip.
6) Is the SIMpull head a commercial-duty pulling device or something for residential work?
The SPH750-24 is classed for commercial use. At 750 kcmil it is a large feeder conductor size you would see on service entrances, switchgear feeds and riser pulls, not residential branch circuits.
7) What shipping length should I plan for on a box of 750 SIMpull heads?
The packed carton runs 29.7 inches long with a master pack height of 6 inches. Worth knowing if you are having them dropped to a job trailer or a gang box with limited shelf depth.
How fast can I get the Southwire SPH750-24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire SPH750-24 come with a warranty?
Absolutely. The Southwire SPH750-24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire SPH750-24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire SPH750-24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.