Metallics JSRM17 8-32 x 1 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.41
$0.41
Metallics JSRM17 8-32 x 1 in. Round Head Slotted Machine Screws - 18-8 Stainless - 100qty

Metallics JSRM17 8-32 x 1 in. Round Head Slotted Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JSRM17
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.41
$0.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1 in. Round Head Slotted Machine Screws - 18-8 Stainless - 100qty

  • Features

    • 18-8 stainless Material
    • Round head with slotted Drive
    • 8-32 Diameter, 1" Length

  • Additional Notes

    • Other sizes and quantities available by request | Tensile strength values for stainless screws are offered as approximations only; there is no single standard for the performance requirements of stainless machine screws.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Slotted
Fastener Head Height:
0.107 - 0.12 in.
Fastener Head Type:
Round
Fastener Head Width:
0.287 - 0.309 in.
Fastener Length:
1
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B85-B95
Language Code:
EN
Material Standard:
SAE
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Round_Head_Machine_Screw.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.64 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.064 - 0.090
Slot Depth:
0.058 - 0.077
Slot Width:
0.045 - 0.054
Sub Division:
Electrical-E H2
Tensile Strength:
80000 psi minimum
Thread Per Inch:
32
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
SRM
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JSRM17 – Frequently Asked Questions

1) Are these stainless machine screws suitable for damp or outdoor locations?
They are 18-8 stainless, which is the austenitic stainless grade normally specified for corrosion resistance in wet and outdoor-exposed work, so they hold up far better than plated steel device screws in damp locations, exterior boxes, and wash-down areas. Metallics lists the application as the electrical, plumbing, heating and air conditioning trades.
2) Will a round head screw sit flush, or do I need a flat head instead?
It won't sit flush. The JSRM17 has a round head that stands 0.107 to 0.12 in. proud of the surface, with a head width of 0.287 to 0.309 in. If the screw has to disappear into a countersunk hole, a cover plate, or a surface that something slides across, order a flat head 8-32 instead.
3) Can I use these screws on a federally funded or Buy American job?
No. The JSRM17 is listed as not Buy American compliant and not ARRA compliant, with country of origin recorded as multiple. For a project with domestic sourcing requirements in the contract, you need a documented domestic fastener instead.
4) How many 8-32 x 1 in. round head screws come in a jar, and can I buy just a few?
They ship in a jar of 100 with a 100-piece order minimum, so this is a bulk pack rather than a loose-count item. Each jar weighs 0.64 lbs.
5) How strong is a stainless 8-32 machine screw compared to a plated steel one?
Metallics lists 80,000 psi minimum tensile for these 18-8 stainless screws, with hardness at Rockwell B85-B95. That is a working strength suitable for device, enclosure, and panel mounting, but treat the tensile figure as an approximation: there is no single standard for the performance requirements of stainless machine screws, and a hardened carbon steel screw will be stronger. For structural or high-load connections, use a graded steel fastener and specify stainless only where corrosion resistance drives the choice.
6) Do these machine screws come with nuts?
No nuts are included. The JSRM17 is screws only, 8-32 x 1 in. round head slotted, so if you are through-bolting rather than threading into a tapped hole or device strap, order 8-32 machine screw nuts and any washers separately.
7) Is 8-32 x 1 inch the only size Metallics offers in this round head stainless screw?
No. The SRM series covers other diameters, lengths, and pack quantities, available by request; JSRM17 is the 8-32 x 1 in. jar of 100. If you are standardizing a maintenance stock across a facility, specify the length you need rather than assuming 1 inch is the only option.
How fast can I get the Metallics JSRM17 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSRM17 come with a warranty?
Absolutely. The Metallics JSRM17 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSRM17?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSRM17 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!