Metallics JTRM86 8-32 x 1 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.43
$0.43
Metallics JTRM86 8-32 x 1 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

Metallics JTRM86 8-32 x 1 in. Round Head Tri-Drive Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTRM86
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.43
$0.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-32 x 1 in. Round Head Tri-Drive Machine Screws - Steel Zinc - 100qty

  • Features

    • Round head with slotted, Phillips and square Drive
    • Steel Zinc Material
    • 8-32 Diameter, 1" Length
    • Made in the USA

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Division:
Electrical H1
Fastener Head Type:
Round
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JTRM86 – Frequently Asked Questions

1) What drivers will fit the Metallics JTRM86 machine screw?
The JTRM86 has a tri-drive head, so the same screw takes a flat blade, a #2 Phillips, or a square (Robertson) driver. Handy on panel and device work where you already have one driver in hand and don't want to swap bits.
2) Is the 8-32 x 1 inch Metallics tri-drive screw a machine screw or a self-tapping screw?
It's a machine screw, cut 8-32, meaning 32 threads per inch on a #8 shank. It needs a mating tapped hole or a nut, it won't cut its own thread in sheet metal. For enclosure covers, device boxes and fixture canopies that already carry 8-32 tapped holes, that's exactly what you want.
3) Will a 1 inch long 8-32 screw be too long for a standard device box and plaster ring?
One inch of shank is longer than the typical 8-32 box screw. It's the right pick when you're stacking through a plaster ring, an extension ring, or a fixture canopy and need the extra reach to catch the tapped ear. On a flush box with a single device, a 1 inch screw will bottom out or protrude, so use a shorter 8-32 there.
4) Will the round head on these Metallics screws sit flush with the surface?
No. It's a round head, so it sits proud of the material with a domed crown and a flat bearing face underneath. If you need the head buried level with the plate or panel, you need a flat head screw in a countersunk hole instead.
5) Are these zinc plated screws OK for damp or outdoor locations?
The JTRM86 is steel with zinc plating, which handles indoor and normally dry locations and gives modest corrosion resistance. For wet locations, coastal exposure, or anywhere washdown chemicals are used, specify stainless 8-32 machine screws instead.
6) How do Metallics JTRM86 screws come packaged for a service truck or shop stock?
They ship in a jar, 100 pieces, which is why they work well as bin or truck stock for an electrical shop. The jar keeps the count contained rather than loose in a drawer.
7) Are Metallics JTRM86 machine screws made in the USA?
Yes, the JTRM86 8-32 x 1 inch tri-drive machine screw is made in the USA. That matters on public and institutional jobs carrying domestic sourcing requirements.
How fast can I get the Metallics JTRM86 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTRM86 come with a warranty?
Absolutely. The Metallics JTRM86 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTRM86?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTRM86 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!