Klein Tools 32584INSR 8-in-1 I...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$98.20
$45.74
Klein Tools 32584INSR 8-in-1 Insulated Precision Screwdriver Set with Case

Klein Tools 32584INSR 8-in-1 Insulated Precision Screwdriver Set with Case

(No reviews yet) Write a Review

Model: 32584INSR
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$98.20
$45.74
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8-in-1 Insulated Precision Screwdriver Set with Case

  • Warnings

    • Do NOT hammer.
    • Always wear approved eye protection.
    • Do NOT use to pry or chisel.

  • Features

    • Rotating Cap for Optimum and Precise Control
    • Cushion-Grip™ handle for greater torque and comfort, spin cap for increased control
    • When combined, handle and blade have a 1000V insulated rating and meet or exceed ASTM F1505-2021
    • Includes #00 and #0 Phillips, 3/32-Inch and 1/8-Inch slotted, and T7H, T8H, T10H, and T15H tamperproof TORX® bits
    • Interchangeable blade locks securely into handle and allows for quick, easy changeouts
    • Layer of orange impact and flame-resistant insulation protects from energized sources
    • Precision Insulated Screwdriver Set with 1000V rated insulation featuring flip blades
    • Heat treated precision machined tips for greater strength


32584INSR - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Color:
Black/Orange
Handle Length:
4.25" (10.8 cm)
Handle Material:
Rubber, High-Dielectric Plastic
Handle Type:
Cushion Grip
Insulated:
Yes
Magnetic:
No
Number Of Pieces:
6
Overall Height:
6.75" (17.1 cm)
Overall Length:
6.75" (17.1 cm)
Overall Width:
0.712" (1.8 cm)
Phillips Bits:
#0, #00
Shank Length:
2.5" (6.36 cm)
Slotted Bits:
1/8" (3.0 mm), 3/32" (2.5 mm)
Standards:
Meets or Exceeds ASTM F1505
Torx Bits:
T7H, T8H, T10H, and T15H
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Type:
Flip Blade Screwdriver
Product Details:
Flip Blade Screwdriver
Product Height:
0.7100 in
Product Material:
S2 Steel
Product Weight:
0.0800 lbs
Product Width:
0.7100 in
Product Depth:
6.7300 in

Klein Tools 32584INSR – Frequently Asked Questions

1) Is the Klein 32584INSR precision screwdriver set rated for live electrical work?
Yes. With the blade seated in the handle, the Klein Tools 32584INSR carries a 1000V insulated rating and meets or exceeds ASTM F1505. The orange insulation layer is impact and flame resistant, and it is the handle-plus-blade assembly that is rated, so the rating only applies when a blade is locked into the handle as intended.
2) What bit sizes come in the Klein 8-in-1 insulated precision screwdriver set?
Eight tips across four double-ended flip blades: #00 and #0 Phillips, 3/32-inch (2.5 mm) and 1/8-inch (3.0 mm) slotted, and tamperproof TORX T7H, T8H, T10H and T15H. The tamperproof TORX sizes are the ones with the center pin hole, so they handle security screws as well as standard TORX heads in those sizes.
3) Will an insulated precision screwdriver reach recessed terminal screws, or do I need a longer shank?
Shank length on the 32584INSR blades is 2.5 inches (6.36 cm), with a 4.25-inch handle and 6.75 inches overall. That is sized for control work, panel board and device screws, small controls, meters and electronics, not for deep-set terminals down a long recess. If the screw sits deeper than about two and a half inches inside a boot or barrier, use a full-length 1000V insulated driver instead.
4) Are the bits in the Klein 32584INSR magnetic?
No. The tips are non-magnetic, so the set will not hold a loose screw on the tip for you, and it also will not pick up swarf or leave residual magnetism on sensitive gear. Tips are heat treated, precision machined S2 steel.
5) How do the flip blades work, and can they come loose while I'm turning a screw?
Each double-ended blade drops into the handle and locks in place, so you pull it out, flip it end for end, and reseat it to change tips. No loose bits to drop in a panel. Four blades give the eight tips. Because the rating depends on the handle and blade together, seat the blade fully before working anything energized.
6) Can I use this insulated screwdriver to pry open a panel or tap a stuck fastener?
No. Klein is explicit: do not hammer it and do not pry or chisel with it. Doing either can breach the insulation layer, which is what keeps the 1000V rating honest. Wear approved eye protection when using it.
7) Does this Klein precision set include a nut driver?
No nut driver sizes are included. The 32584INSR covers Phillips, slotted and tamperproof TORX only. If you need insulated nut drivers for terminal hex heads, that is a separate tool.
8) Is the handle on this insulated precision driver comfortable for fine adjustment work?
The handle is Cushion-Grip rubber over high-dielectric plastic, black and orange, 4.25 inches long, with a rotating spin cap on the end so you can brace a fingertip and feed the screw with the other hand. That cap is what makes it workable for small fasteners where torque matters less than control.
9) What part number do I order to standardize technicians on this insulated precision set?
Order Klein Tools 32584INSR. It ships as a set with a carrying case, and the whole kit weighs 0.08 lbs at roughly 6.73 by 0.71 by 0.71 inches, small enough to live in a tech's pouch rather than the truck.
How fast can I get the Klein Tools 32584INSR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 32584INSR come with a warranty?
Absolutely. The Klein Tools 32584INSR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 32584INSR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 32584INSR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!