Metallics JRWS11V 8 x 1-1/2 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.41
$0.41
Metallics JRWS11V 8 x 1-1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - 500qty

Metallics JRWS11V 8 x 1-1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JRWS11V
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.41
$0.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/2 in. Round Washer Head Combo Sharp Point Tapping Screws - Steel Zinc - 500qty

  • Features

    • Made in the USA
    • Round washer head with Phillips and square Drive
    • Steel Zinc Material
    • 8 Diameter, 1-1/2" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Division:
Electrical H1
Fastener Head Type:
Round Washer
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Screws
Product Material:
Steel Zinc

Metallics JRWS11V – Frequently Asked Questions

1) What size and length are the Metallics JRWS11V tapping screws?
They're a #8 diameter screw, 1-1/2 inches long, with a sharp point for driving into sheet metal, studs, and wood framing. The combination of that length and the #8 shank suits fastening through strap, box ears, or fixture flanges into framing rather than light sheet-to-sheet work.
2) Can I drive the JRWS11V screws with a square bit instead of Phillips?
Yes. The round washer head is a combo drive, so it takes either a Phillips bit or a square (Robertson) bit. Handy on overhead electrical work where a square bit holds the screw on the driver without a magnet.
3) Why pick a round washer head screw over a flat or pan head for mounting straps and boxes?
The round washer head gives a wider bearing surface than a pan head, so it won't pull through a strap hole, a thin box ear, or a slotted bracket. That's the reason it's the common choice for securing conduit straps, device boxes, and fixture hardware where the hole is larger than the screw shank.
4) Are the Metallics JRWS11V screws OK for outdoor or damp locations?
They're steel with a zinc plating, which handles indoor and normally dry locations fine and gives some protection in damp conditions. Zinc-plated steel is not a substitute for stainless in direct weather exposure, coastal air, or treated-lumber contact, so for those use a stainless fastener instead.
5) Do I need to pre-drill for these sharp point screws?
No pilot hole is needed in wood framing or thin sheet metal, the sharp point taps its own thread. They are not self-drilling, so for thicker steel, heavy angle iron, or masonry they're the wrong fastener. Masonry calls for a screw anchor instead.
6) What is the manufacturer part number for the Metallics #8 x 1-1/2 in. round washer head combo screw?
Order it as Metallics JRWS11V. That number covers the #8 by 1-1/2 inch round washer head combo drive sharp point tapping screw in zinc-plated steel, jar of 500. It's made in the USA.
7) How do the JRWS11V screws come packaged for a jobsite or truck stock?
They're supplied in a jar of 500, which is the format most electricians keep on the van or in a gang box, since it reseals and you can pour a handful into a pouch without a loose box spilling.
How fast can I get the Metallics JRWS11V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JRWS11V come with a warranty?
Absolutely. The Metallics JRWS11V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JRWS11V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JRWS11V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!