Metallics TS22B 8 x 1-1/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.14
$0.14
Metallics TS22B 8 x 1-1/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1500qty

Metallics TS22B 8 x 1-1/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: TS22B
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.14
$0.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1500qty

  • Additional Notes

    • Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6.4

  • Features

    • Steel Zinc Material
    • Pan head with Phillips Drive
    • 8 Diameter, 1-1/4" Length

Manufacturer Resources

Product Specs

Minimum Purchase:
1500 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.3-2013
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
1/1/04
Hardness:
Rockwell C28 - 38
Language Code:
EN
Material Standard:
AISI 1016 - 1024
Order Minimum Imperial:
1500
Order Minimum Uom Imperial:
TH
Pack Type:
Box
Phillips Recess Depth:
0.108
Phillips Recess Diameter:
0.169 - 0.182
Phillips Recess Width:
0.03
Product Group:
Fasteners
Screw Point Type:
Gimlet Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.4
Torsional Strength:
39 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type A Tapping Screw
Type2:
Type A Tapping Screw
Series:
JTSP
Product Finish:
Zinc
Product Details:
Type A Tapping Screw
Product Material:
Steel Zinc

Metallics TS22B – Frequently Asked Questions

1) What does a Type A tapping screw like the Metallics TS22B actually fasten into?
Type A is the sheet metal tapping thread, and the TS22B has a gimlet (sharp) point with 15 threads per inch. That combination is made to pierce and form its own thread in thin sheet metal, sheet steel boxes, and similar light gauge material without a pre-tapped hole. It is not a machine screw thread, so it will not run into a tapped or threaded hole, and it is not a self-drilling point, so heavy plate needs a pilot hole.
2) Can I use the Metallics TS22B on a federal or Buy American job?
No. The TS22B is marked not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. If your contract carries a domestic sourcing clause, you need a domestically produced fastener instead.
3) What size Phillips driver do I need for the Metallics TS22B #8 screws?
A #2 Phillips bit. The recess is 0.169 to 0.182 inch in diameter and 0.108 inch deep, which is standard #2 geometry, so a #1 bit will cam out and a #3 will not seat. Worth having good bits on hand if you are running through a box of 1500.
4) How many Metallics TS22B screws come in a box?
They ship as a box of 1500. The TS22B is the #8 x 1-1/4 inch pan head Phillips sharp point in zinc plated steel, so a single box covers a lot of device and box mounting on a build.
5) Will the pan head on these #8 tapping screws sit flush or stand proud?
It stands proud. A pan head bears on the surface rather than countersinking, with a head width of 0.306 to 0.322 inch and a head height of 0.105 to 0.115 inch on the TS22B. If you need the fastener to finish flush with the material, you want a flat head countersunk screw instead.
6) Are these zinc plated screws OK for outdoor or damp locations?
The TS22B is zinc plated carbon steel, which is a mild indoor corrosion coating. It holds up in dry interior work and protected locations, but direct weather exposure, wet locations, or coastal air will eventually rust it. For those, specify stainless steel rather than zinc plated steel.
7) Do these Metallics tapping screws meet a dimensional standard I can put on a submittal?
Yes. The head and recess dimensions conform to ASME B18.6.3-2013 and the thread conforms to ASME B18.6.4, with material to AISI 1016 to 1024. One caveat for spec work: Metallics notes that dimensions for its #9 diameter are independent of ASME B18.6.4, which does not affect the #8 TS22B.
8) Is the Metallics TS22B available in other lengths or smaller quantities?
The TS22B itself is the #8 diameter by 1-1/4 inch long version, supplied in a 1500 piece box. Metallics states other sizes and quantities are available by request, so if you need a shorter or longer #8 tapping screw or a smaller pack, ask for it by size rather than assuming this part number covers it.
How fast can I get the Metallics TS22B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS22B come with a warranty?
Absolutely. The Metallics TS22B is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS22B?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS22B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!