Metallics JFWP65 8 x 1-3/4 in....
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.20
$0.20
Metallics JFWP65 8 x 1-3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

Metallics JFWP65 8 x 1-3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JFWP65
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.20
$0.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-3/4 in. Flat Head Phillips Wood Screws - Steel Zinc - 100qty

  • Features

    • 8 Diameter, 1-3/4" Length
    • Screws of nominal lengths too short to accomodate the minimum thread length shall have threads extending as close to the underside of the head as practicable.
    • Steel Zinc Material
    • Flat Head with Phillips Drive

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
1/3/04
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Steel_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
0.69 lbs
Product Width:
3 in
Screw Point Type:
Tapered Point
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWP
Product Finish:
Zinc
Product Details:
Wood Screw
Product Material:
Steel Zinc

Metallics JFWP65 – Frequently Asked Questions

1) How many Metallics JFWP65 wood screws come in a jar, and can I buy fewer than that?
The JFWP65 #8 x 1-3/4 inch flat head wood screws ship in a jar of 100, and 100 is the order minimum. That is the unit of sale, so you buy in whole jars rather than loose counts.
2) Can I use the JFWP65 screws on a federally funded job with domestic content requirements?
No. The JFWP65 wood screws are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. On a project with domestic sourcing language you will need a documented domestic fastener instead.
3) What size Phillips bit do I need for these #8 wood screws?
A #2 Phillips bit. The JFWP65 screws use a Phillips recess 0.191 to 0.204 inch in diameter and 0.113 to 0.136 inch deep, which is the standard #2 driver profile, so a worn bit is the usual cause of cam-out on these.
4) Will these flat head screws sit flush in a countersunk hole?
Yes, that is what the flat head is for. The head measures 0.292 to 0.332 inch across with a head height of 0.100 inch, so an 82 degree countersink of that diameter brings the screw flush or slightly below the surface. In softwood the head will usually pull itself flush without pre-countersinking.
5) Are zinc plated wood screws like these OK for outdoor or damp locations?
These are zinc plated steel, which is a dry indoor finish. Zinc plating handles incidental moisture, but for exterior work, pressure treated lumber, or wet locations you want stainless or a coated exterior screw instead. For interior framing, blocking, strapping device boxes and mounting panels to wood, zinc steel is standard.
6) Are these the right screws for mounting electrical boxes and straps to wood?
Yes, that is the intended use. The JFWP series is listed for the electrical, plumbing, heating and air conditioning trades, and a #8 x 1-3/4 inch zinc flat head Phillips is the common size for fastening device boxes, straps, panels and backer boards to studs and blocking.
7) What standard are these Metallics wood screws built to?
Both the dimensions and the threads follow ASME B18.6.1 (thread standard cited as ASME B18.6.1-1997). That is the wood screw spec, so head diameter, head height and thread form are interchangeable with any other B18.6.1 #8 flat head wood screw on a drawing or submittal.
8) What does a jar of 100 Metallics JFWP65 screws weigh for shipping and stocking?
About 0.69 lbs for the jar. That makes it easy to carry a few sizes on the truck or stock multiple lengths on a shelf in a service van without weight becoming a factor.
How fast can I get the Metallics JFWP65 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWP65 come with a warranty?
Absolutely. The Metallics JFWP65 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWP65?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWP65 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!